Paul-T's Recent Activity

  1. Paul-T liked String Tree's post in the thread '73 Champ help needed.

    Thank you EVERYBODY for your support. As it turns out, it was a bad connection from the Volume Pot to the 12AX7. WHile I was at it, I...

    May 20, 2019 at 4:54 AM
  2. Paul-T replied to the thread Which Section of The Amp to Plan First?.

    to OP; I didn't realise Tube-town did a Portaflex, definitely worth considering if you have any friends coming back from Europe. Their...

    May 20, 2019 at 3:17 AM
  3. Paul-T liked VintageSG's post in the thread Which Section of The Amp to Plan First?.

    https://www.tube-town.net/ttstore/Kits/Verstaerker/TT-Kit-BFlex::8113.html Not suggesting you buy a kit from Europe. The shipping would...

    May 20, 2019 at 3:05 AM
  4. Paul-T replied to the thread Cab Material Considerations.

    Pine is simply what was used. It's often compared to ply, which came later and was what Marshall used, and it is thought to sound less...

    May 19, 2019 at 6:09 PM
  5. Paul-T liked Snfoilhat's post in the thread Which Section of The Amp to Plan First?.

    That YBA1 is essentially a Fender Bassman 5F6a-alike with less available tube selection. But roughly the same physical size and power....

    May 19, 2019 at 3:38 PM
  6. Paul-T replied to the thread Which Section of The Amp to Plan First?.

    speaking as the person who made things more complicated by suggesting the Ampeg B15/portaflex... do what Rob suggests and make a 5F6A...

    May 19, 2019 at 3:28 PM
  7. Paul-T liked robrob's post in the thread Which Section of The Amp to Plan First?.

    10 to 20 watts = EL84 or 6V6 power tubes. Consider doing a Fender 5F6A Bassman kit. It does about 40 watts and was built for bass but...

    May 19, 2019 at 3:15 PM
  8. Paul-T liked FenderLover's post in the thread Which Section of The Amp to Plan First?.

    Nice tube but expensive. I don't know if they are reproducing them either, but 6L6GC works fine in their place. I had an Ampeg V4 that I...

    May 19, 2019 at 3:15 PM
  9. Paul-T replied to the thread 5f2a (another beginner with the same questions sorry).

    Yay! great news. Well done for persevering, and how fantastic there were so many folks here helping.

    May 19, 2019 at 1:34 PM
  10. Paul-T liked D'tar's post in the thread 5f2a (another beginner with the same questions sorry).

    A pop on v1b p8 is as good as a pop on the grid of 6v6, this would indicate the signal path is good from that point onward through to...

    May 19, 2019 at 10:14 AM
  11. Paul-T liked zippofan's post in the thread Chunky or old skool LED bezels?.

    I've been thinking of adding a couple of those premounted/wired LEDs to my next BLMS order. They have Lumbergs for a nice price and I...

    May 19, 2019 at 9:34 AM
  12. Paul-T liked matmosphere's post in the thread Chunky or old skool LED bezels?.

    Love my switches has some with a clr built in. That way they can be used with 9v

    May 19, 2019 at 9:34 AM
  13. Paul-T replied to the thread 5F1 “Champ” Build - Splinters, Sparks and Serious Fun Lie Ahead!.

    very nicely done. Did you put a side angle on the cab? Did I miss that bit?

    May 18, 2019 at 5:55 PM
  14. Paul-T liked zippofan's post in the thread Chunky or old skool LED bezels?.

    The LED just goes into the open end, the back of the lens has clips to hold it in the enclosure/panel. I almost always mount LEDs...

    May 18, 2019 at 5:52 PM
  15. Paul-T replied to the thread Chunky or old skool LED bezels?.

    How do they fit? Does the LED simply clip into them or is there some kind of holder?

    May 18, 2019 at 4:13 PM
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.