Asher Guitars WD Music Products Amplified Parts Mod Kits DIY Nordstarnd Pickups darrenriley.com
Asher Guitars WD Music Products Amplified Parts Mod Kits DIY Nordstarnd Pickups Warmoth.com
Asher Guitars WD Music Products Amplified Parts Mod Kits DIY Nordstarnd Pickups Warmoth.com

Mr Ridesglide's Recent Activity

  1. Mr Ridesglide liked Finck's post in the thread Low B+ Voltages on Power Up.

    Yes, since in that part of circuit the ground will be more positive than the other point. Your sketch is pretty fine.

    Feb 20, 2018 at 2:55 PM
  2. Mr Ridesglide replied to the thread Low B+ Voltages on Power Up.

    And the way I drew it (the last capacitor before the 10kL pot) with the negative to the circuit and positive to ground is correct still...

    Feb 20, 2018 at 12:04 PM
  3. Mr Ridesglide liked Wally's post in the thread Looking at a few Fender amps to accompany my AVRI 64 ....

    I suggest using a 12AY7 or a 5751 in V1. Those tubes will give you a wider sweep on the first volume control ...Clean mode...and also...

    Feb 20, 2018 at 11:10 AM
  4. Mr Ridesglide attached a file to the thread Low B+ Voltages on Power Up.

    [ATTACH] Thank you Finck! This is a Greinacher Doubler.... now... does this mean that I won't need the previous "rest of the bias...

    IMG_1087.jpg Feb 20, 2018 at 11:00 AM
  5. Mr Ridesglide liked Finck's post in the thread Low B+ Voltages on Power Up.

    Here we go: [ATTACH] Ignore that "+" and "-" indication on the AC source Vi, since it's AC, it doesn't have polarity. Just connect...

    images.png Feb 20, 2018 at 7:59 AM
  6. Mr Ridesglide liked jsnwhite619's post in the thread Hammond AO-44 Conversion - Walnut Combo Cab.

    Boiled linseed oil will make the grain pop the most and has no varnish in it. And Walnut loves it. Give a few days of sanding and...

    1519095768683.jpg Feb 19, 2018 at 10:29 PM
  7. Mr Ridesglide replied to the thread Low B+ Voltages on Power Up.

    Yes. I get 38 where I THINK i need 75. AC was 28 VAC. I don’t understand why I would need +73. I just want to be able to bring the...

    Feb 19, 2018 at 9:44 PM
  8. Mr Ridesglide attached a file to the thread Low B+ Voltages on Power Up.

    [ATTACH]

    IMG_1086.JPG Feb 19, 2018 at 8:34 PM
  9. Mr Ridesglide replied to the thread Low B+ Voltages on Power Up.

    one way or another I am going to get this figured out - I am still only getting -38 v and getting +38 at the junction after the diode to...

    Feb 19, 2018 at 8:27 PM
  10. Mr Ridesglide liked D'tar's post in the thread Low B+ Voltages on Power Up.

    Absolutely do that:)

    Feb 19, 2018 at 8:23 PM
  11. Mr Ridesglide liked jondanger's post in the thread Hammond AO-44 Conversion - Walnut Combo Cab.

    Couldn’t find any letters and numbers that I loved so I cut a thin mahogany veneer and cut these out of it with an exacto knife, then...

    IMG_0054.JPG Feb 19, 2018 at 7:10 PM
  12. Mr Ridesglide liked kleydejong's post in the thread "Reactive" loadbox / attenuator.

    I have a Two Notes Captor which I use as a reactive load box for recording or silent playing. I primarily use it to: 1) Safely load...

    Feb 19, 2018 at 7:01 PM
  13. Mr Ridesglide liked shortcircuit's post in the thread "Reactive" loadbox / attenuator.

    I built one a while back so I can play at night with headphones so as not to wake up the kids. The reactive load simulates the...

    Reactive.jpg Feb 19, 2018 at 7:00 PM
  14. Mr Ridesglide replied to the thread Low B+ Voltages on Power Up.

    Okay - got parts in and some time. I now have what I think is a close facsimile of the bias circuit from the donor transformer. My...

    Feb 19, 2018 at 6:58 PM
  15. Mr Ridesglide liked Wally's post in the thread JTM45 Sounds beautiful then Main Fuse blows!.

    Welcome. You don’t say what your plate voltage was at that 48ma of current draw. If it was around 450’ you are about 86% of max plate...

    Feb 19, 2018 at 3:22 PM