$29.99 5F1 Champ Board With Components DIY

[hackworth1]

$29.99 5F1 Champ Turret Board with Components!




Here's a super low-cost opportunity to practice your soldering skills and build a working

5F1 Champ point-to-point circuit board in the process. Just $29.99!

With this kit, the entry-level amplifier afficionado won't break the household budget getting started.

Build your board now and order the other parts from Boot Hill Amps later.

I'll send you lots of helpful links to get you going.

Kit Includes:

Rigid, Electrical-Grade Fiberglass (GPO3) turret board.

Multi-Comp oversize Filter Capacitors, 600v PE Coupling Capacitors, Metal Film, Cement and...

Carbon Comp Resistors, Vishay 5 watt Cathode Bias Resistor, 22uF, 50V Cathode Bypass Caps -

all the caps and resistors required to build the venerable 5F1 board.

Order now. Just Ten of these 5F1 board kits are being offered to my first ten TDPRI friends.

PM me here or email haircuttingcowboy@yahoo.com

and I'll send you a paypal invoice.



SHIPPING: $5.01 shipping to CONUS and $7.01 to Canadian addresses

Includes everything you see in the big picture up top. I've even labelled all the resistors for you.

[hackworth1]

Two Down. Eight to go. Thanks to buyers. Have fun.

[sferguso]

Thanks for the kit, after reading all (well, most) of your posts helping others and watching your videos, I felt like I was talking to and old friend on the phone with you today. Looking forward to my next project.
Thanks
Scott

[hackworth1]

OF NOTE TO OFFSHORE CUSTOMERS:

This $29.99 Champ Board and Components will ship to Europe or Asia in a padded envelope by Priority Mail US Postal Service. $18 shipping

PM or email

haircuttingcowboy@yahoo.com

Also:

Custom Orders

Other parts offered which can be added to meet your needs.

(Minimum order $15 please)

mil spec 22 and 18ga teflon wire set for $6
Ground Bus $1
Three lug terminal strip $2
Switch/1M Vol Pot $5

bolt kit - machine screws and k lock nuts, nylon machine screws, nuts and plastic standoffs $4

nice pilot light $7
budget pilot light $3
2 octal tube sockets $7
Add one noval tube socket/shield $3
three tip shunt 1/4 inch jacks $9
chassis mount fuse holder w/fuse for $4
2 rubber chassis grommets $2
strain relief $1
power cord $5

Limited time offer. While supplies last.

See other offer on this site for complete 5F1 Chassis Kit (minus Transformers)

[teletwang67]

Do you have a kit for a blackface AA764 board with parts?

[hackworth1]

I can make a fiberglass turret board for you in either red or blue and supply all the on-board components necessary.

Also available are all the parts and materials for 5F1 as listed above,

Plus:

Carling Switches, 1M Pots and other popular potentiometer values

I also have cap cans and clamps.

Unfortunately, I do not, however, stock any BF Chassis.

Just figure out any and all parts you would want to get from me and I'll give you a fair price by PM.

[teletwang67]

Originally Posted by hackworth1

I can make a fiberglass turret board for you in either red or blue and supply all the on-board components necessary.

Also available are all the parts and materials for 5F1 as listed above,

Plus:

Carling Switches, 1M Pots and other popular potentiometer values

I also have cap cans and clamps.

Unfortunately, I do not, however, stock any BF Chassis.

Just figure out any and all parts you would want to get from me and I'll give you a fair price by PM.

I have a chassis, I just need the board, caps, resistors, and tube sockets.