Paging Don Mare, II

Bill Ashton · July 2nd, 2003, 11:28 AM

Don, have a question regarding wiring a T-100 and TN-100 with a Fender 4-way switch. Can this be done and is there a particular wiring scheme to use? I was not successful this past weekend, and hope that it is just me.

The sensors read ~5,000 ohms on my cheapo meter, so I presume they are OK.

Thanks for your response...

Don Mare · July 2nd, 2003, 11:57 AM

WOW!

I dunno about 3 post calling me out of bed here?
were a few hours behind out here,
I did check this board at 12:00 pm lastnight, and I wake up to 3 threads calling me like I have not been here in a week... gosh. :?

Yes the 4 way works.

lace code
Orange =coil Hot
White =coil Ground
Green = metal pickup chassis ground

Those pups should reat 5.6k to 6.0k

*I hope a moderator will clean up all these "Hey Don Mare Post"* soon!!!!

astro · July 2nd, 2003, 02:42 PM

Don, I wouldn't sweat it. Its pretty easy to see all of these posts were made in the span of a half an hour.

Bill Ashton · July 2nd, 2003, 04:14 PM

Actually, I sent a coupla posts to you on the AGI board Monday afternoon, but they somehow were dropped off within an hour...there was another fella whose post was "why are my posts dropping off," and that was gone too! But I digress...

Thanks so much for the info, we'll try again this coming weekend.

S0C7 · July 2nd, 2003, 04:51 PM

You may want to take a look at this thread.

http://www.tdpri.com/viewtopic.php?t=5178

Bill Ashton · July 2nd, 2003, 05:26 PM

Sorry about that. I did think that perhaps Don's reply would be of interest to others...I was in a hurry and didn't look to see if he had any recent posts.

Bill Ashton · July 2nd, 2003, 05:32 PM

I now see my original post on this board really made it in...after submitting this machine sorta locked up and when I finally got back in I didn't see my post, so I did another...my error.

S0C7 · July 2nd, 2003, 09:27 PM

Not a problem, man. I was just pointing out another alternative that may have gotten his attention.

July 2nd, 2003, 11:28 AM	#1 (permalink)
Bill Ashton Tele-Meister Join Date: Mar 2003 Location: Central Massachusetts Posts: 475	Paging Don Mare, II Don, have a question regarding wiring a T-100 and TN-100 with a Fender 4-way switch. Can this be done and is there a particular wiring scheme to use? I was not successful this past weekend, and hope that it is just me. The sensors read ~5,000 ohms on my cheapo meter, so I presume they are OK. Thanks for your response...

July 2nd, 2003, 04:14 PM	#4 (permalink)
Bill Ashton Tele-Meister Join Date: Mar 2003 Location: Central Massachusetts Posts: 475	Thanks, Don... Actually, I sent a coupla posts to you on the AGI board Monday afternoon, but they somehow were dropped off within an hour...there was another fella whose post was "why are my posts dropping off," and that was gone too! But I digress... Thanks so much for the info, we'll try again this coming weekend.

July 2nd, 2003, 04:51 PM	#5 (permalink)
S0C7 Tele-Meister Join Date: Mar 2003 Location: Omaha, NE Posts: 246	FYI... You may want to take a look at this thread. http://www.tdpri.com/viewtopic.php?t=5178

July 2nd, 2003, 05:26 PM	#6 (permalink)
Bill Ashton Tele-Meister Join Date: Mar 2003 Location: Central Massachusetts Posts: 475	Sorry... Sorry about that. I did think that perhaps Don's reply would be of interest to others...I was in a hurry and didn't look to see if he had any recent posts.

July 2nd, 2003, 05:32 PM	#7 (permalink)
Bill Ashton Tele-Meister Join Date: Mar 2003 Location: Central Massachusetts Posts: 475	and... I now see my original post on this board really made it in...after submitting this machine sorta locked up and when I finally got back in I didn't see my post, so I did another...my error.

July 2nd, 2003, 11:57 AM	#2 (permalink)
Don Mare Tele-Meister Join Date: Mar 2003 Location: Long Beach, CA. Age: 50 Posts: 455	WOW! I dunno about 3 post calling me out of bed here? were a few hours behind out here, I did check this board at 12:00 pm lastnight, and I wake up to 3 threads calling me like I have not been here in a week... gosh. :? Yes the 4 way works. lace code Orange =coil Hot White =coil Ground Green = metal pickup chassis ground Those pups should reat 5.6k to 6.0k I hope a moderator will clean up all these "Hey Don Mare Post" soon!!!!

July 2nd, 2003, 02:42 PM	#3 (permalink)
astro Tele-Holic Join Date: Mar 2003 Location: North Shoa, MA Posts: 872	Don, I wouldn't sweat it. Its pretty easy to see all of these posts were made in the span of a half an hour.

July 2nd, 2003, 09:27 PM	#8 (permalink)
S0C7 Tele-Meister Join Date: Mar 2003 Location: Omaha, NE Posts: 246	Not a problem, man. I was just pointing out another alternative that may have gotten his attention.