|
|
|
||||||||||||||||||||||
|
|||||||
| Home | Forum | Resources | Shop | Gallery | Classifieds | Reviews | Register | FAQ | Search | Today's Posts | Mark Forums Read |
| Telecaster Discussion Forum The world's largest Fender Telecaster Discussion Forum. Please keep discussion limited to Telecaster topics here. |
|
|
Thread Tools |
|
|
#1 (permalink) |
|
TDPRI Member
Join Date: Nov 2003
Posts: 75
|
Fuzzy - Need help with your wiring diagram
Fuzzy....this is a dumb question. I printed your standard telecaster wiring diagram from your website. My question is this. Is the diagram a view of the guitar from the top looking down ...in other words, are the terminals on the switch and the pots as they would be located if you could see through the control plate as you looked at the guitar from above. Or, is the diagram from the underside of the pots and switch? Thanking you in advance for your help.
|
|
|
|
|
|
#2 (permalink) |
|
Doctor of Teleocity
|
![]() Which side should the spring on the switch be on? Ant-sir iss 90% of them are as shown above. They will werk both wayz. My lugs are not staggered the same as inna drawing. Ant-sir iss sum later wonz haff a different layout but wire the same way jes don't look the same. ![]() Please visit my page |
|
|
|
| Thread Tools | |
|
|
The words Fender®, Telecaster®, Stratocaster® and the associated headstock designs are registered trademarks of the Fender Musical Instruments Corporation.
The TDPRI is an independent,member supported forum and is not affiliated with Fender Musical Instruments Corporation.