Dear Fuzzy- re: Esquire Nutter 1

'ol hank pank · June 9th, 2003, 08:21 AM

Hi there, I am considering using the Esquire nutter 1 wiring scheme on one of my teles.

Can you 'splain the details of the diff. positions?
Also she's got 500k pots? Will this work OK?
CRL switches seem cheap enough, I will go w/ one of those.

PS this pickup in there is a Duncan Jerry Donohue (which I LUV).

Thanks for everything you do for us tele obsessive wierdos.

Rich

0le FUZZY · June 9th, 2003, 01:30 PM

First the animation of the switch. As yew kin cee it produces a moving jumper betwixt the posts of the switch.

If yew apply each position tew the drawin yew kin figger out watt jumps tew watt.

The results are NECK position threw the caps and resistor for a muffled, bassy sound using all caps and resistor.

Middle is hot tew lead with tone control.

Lead is volume only.

Been a while cents I went threw this mess so I hope it werks fer yew and hope my stuff iss still kerrect HEE! HEE!

( Oh, I never done one with 500K pots but it should werk. Mebby jes a liddo different position sound)

Tele295 · June 9th, 2003, 02:32 PM

Y'all have any idea if this would work with a Duncan Hot Rails? Are there any different values I should use?

June 9th, 2003, 08:21 AM	#1 (permalink)
'ol hank pank Tele-Meister Join Date: Mar 2003 Location: Scotia NY Posts: 436	Dear Fuzzy- re: Esquire Nutter 1 Hi there, I am considering using the Esquire nutter 1 wiring scheme on one of my teles. Can you 'splain the details of the diff. positions? Also she's got 500k pots? Will this work OK? CRL switches seem cheap enough, I will go w/ one of those. PS this pickup in there is a Duncan Jerry Donohue (which I LUV). Thanks for everything you do for us tele obsessive wierdos. Rich __________________ TDPRI tpyo Myster

June 9th, 2003, 01:30 PM	#2 (permalink)
0le FUZZY Doctor of Teleocity Join Date: Mar 2003 Location: Kolly-forn-knee-ya Posts: 10,001 6 Photos	Splainin ! First the animation of the switch. As yew kin cee it produces a moving jumper betwixt the posts of the switch. If yew apply each position tew the drawin yew kin figger out watt jumps tew watt. The results are NECK position threw the caps and resistor for a muffled, bassy sound using all caps and resistor. Middle is hot tew lead with tone control. Lead is volume only. Been a while cents I went threw this mess so I hope it werks fer yew and hope my stuff iss still kerrect HEE! HEE! ( Oh, I never done one with 500K pots but it should werk. Mebby jes a liddo different position sound)

June 9th, 2003, 02:32 PM	#3 (permalink)
Tele295 Friend of Leo's Join Date: Mar 2003 Location: Haunted Amp, CA Posts: 3,265 14 Photos	Y'all have any idea if this would work with a Duncan Hot Rails? Are there any different values I should use? __________________ "Turn it up and it doesn't need any reverb." - Danny Gatton www.dannygatton.info Tiger Town Aces - Music That Bites Back In Redd we trust! Free Bill Kirchen! If lawyers are disbarred and clergymen defrocked, doesn't it follow that electricians can be delighted, musicians denoted, cowboys deranged, models deposed, tree surgeons debarked, and dry cleaners depressed?