MIM standard neck specs

outbreak · May 8th, 2008, 12:43 AM

i've been looking round but can't find the neck specs on a mim standard. what radius and fret sizes do they have because i love mines neck and want to check out some other teles with similar necks

boris bubbanov · May 8th, 2008, 01:17 AM

Any MIM Standard built in the last few years would be "medium jumbo" frets ( middlin' size ), 9.5 inch radius ( a middlin' curvature board ), 1.65 nut width, with a 1 + 3/8ths string array at the neck.

I don't have the thicknesses handy on the gentle "C" neck curvature, but it is thicker than an American Series or American Standard guitar, and it is about the same as a Highway One or MIM Nashville Deluxe neck, or a smidge smaller. Maybe .800 tapering up to a .840, but that's just a guess.

The tuner bore should be about 10 mm.

25.5 scale, of course.

outbreak · May 8th, 2008, 01:21 AM

exactly what i was looking for thanks boris

Tdot · May 8th, 2008, 09:06 AM

MIM Standard Specs from Fender

May 8th, 2008, 12:43 AM	#1 (permalink)
outbreak Tele-Meister Join Date: Dec 2007 Location: Australia Age: 20 Posts: 410	MIM standard neck specs i've been looking round but can't find the neck specs on a mim standard. what radius and fret sizes do they have because i love mines neck and want to check out some other teles with similar necks __________________ '07 MIM std tele '07 Epiphone Studio Dot '04ish J&D Luthiers LP copy '07 VOX ad50vt

May 8th, 2008, 01:17 AM	#2 (permalink)
boris bubbanov Poster Extraordinaire Join Date: Feb 2007 Location: New Orleans, LA + in the past Posts: 5,910	Any MIM Standard built in the last few years would be "medium jumbo" frets ( middlin' size ), 9.5 inch radius ( a middlin' curvature board ), 1.65 nut width, with a 1 + 3/8ths string array at the neck. I don't have the thicknesses handy on the gentle "C" neck curvature, but it is thicker than an American Series or American Standard guitar, and it is about the same as a Highway One or MIM Nashville Deluxe neck, or a smidge smaller. Maybe .800 tapering up to a .840, but that's just a guess. The tuner bore should be about 10 mm. 25.5 scale, of course. __________________ Bubban0v

May 8th, 2008, 01:21 AM	#3 (permalink)
outbreak Tele-Meister Join Date: Dec 2007 Location: Australia Age: 20 Posts: 410	exactly what i was looking for thanks boris __________________ '07 MIM std tele '07 Epiphone Studio Dot '04ish J&D Luthiers LP copy '07 VOX ad50vt

May 8th, 2008, 09:06 AM	#4 (permalink)
Tdot Friend of Leo's Join Date: Mar 2005 Location: Back of the Wasatch, UT Posts: 3,289 58 Photos	MIM Standard Specs from Fender __________________ And now for some feedback: EEEEEEEEEEEEEEEEEEEEEEEEEEE