Check out the newest news, views, lessons and more for Fender lovers -- FenderRocks.com

ifallalot · March 30th, 2012, 09:49 AM

I am putting together a couple of male to male XLR turnarounds and am not finding anything easily on Google.

Do I just wire both sides as male for a male-male XLR adapter?

TIA

Theorage · March 30th, 2012, 12:43 PM

Pin 1 to Pin 1...Pin 3 to Pin 3

If connectors are wired back to back, then wires 1 & 2 will cross over each other.

ifallalot · March 30th, 2012, 12:45 PM

Gracias

March 30th, 2012, 09:49 AM	#1 (permalink)
ifallalot Tele-Holic Join Date: Feb 2012 Location: Carlsbad, CA Age: 33 Posts: 641	Quick XLR pinout help I am putting together a couple of male to male XLR turnarounds and am not finding anything easily on Google. Do I just wire both sides as male for a male-male XLR adapter? TIA

March 30th, 2012, 12:43 PM	#2 (permalink)
Theorage TDPRI Member Join Date: Dec 2009 Location: Pacific NW Posts: 36	Pin 1 to Pin 1...Pin 3 to Pin 3 If connectors are wired back to back, then wires 1 & 2 will cross over each other. __________________ Wood \| Power \| Music = The Electric Guitar

Sponsored Ads	#
Forum Sponsor Sponsored posting Join Date: March, 2003 Location: Forum HQ Age: Posts: N/A	Sponsored by...

March 30th, 2012, 12:45 PM	#3 (permalink)
ifallalot Tele-Holic Join Date: Feb 2012 Location: Carlsbad, CA Age: 33 Posts: 641	Gracias

Check out the newest news, views, lessons and more for Fender lovers -- FenderRocks.com

IMPORTANT:Treat everyone here with respect, no matter how difficult! No sex, drug, political, religion or hate discussion permitted here.