4-way switch mod

[cowboydan23]

I'm having a mini-humbucker installed in the neck position of my tele. I was thinking about having the 4 way switch mod done as well (2 pickups in series and parallel). How does this sound with the humbucker? I know with 2 single coils it fattens the sound but with a humbucker and a single coil would that be too muddy?

Any advice or other ideas for mods would be appreciated.

[jlerhun]

You can find some inspiration in these diagrams (48, 47 and 46)
http://www.geocities.jp/dgb_studio/shvari_e.htm#48
They provide series and/or parallel wiring with the HB splitted, on a 5-way switch.

[cowboydan23]

Cool, thanks.

[poboy]

If you want to use a 4-way switch, you will need to use a mini-humbucker with a separate wire for the case ground. The original mini-hums had the case connected to the signal ground.