 |
 |
|
| Supporting Vendors | ||||||
 |
 |
 |
 |
 |
 |
 |
| advertise on the tdpri | ||||||
|
||||||||||||||||||||||||
|
|||||||
| Tele-Technical Telecaster nuts and bolts talk ONLY |
 |
|
|
Thread Tools |
February 17th, 2004, 12:46 PM
|
#1 (permalink) |
|
TDPRI Member
Join Date: Feb 2004
Posts: 8
|
Standard Mim routings..? just curious....
Was reading the 'I need a new body' post and it seems like many of you have knowledge about the current MIM teles...
At any rate, I've filled my MIM tele's routing marks (so I can ditch the PG). And I've been wondering why they are there to begin with. There were 4 routes to be filled: 1) the 'finger' to the control cavity 2) 3 x quarter/nickel sized holes, about 1/2" deep... Obviously the 'finger' is probably for ease of wiring installation. Anyone know what the others were for? Balance, or 'tone' or just plain ol' mistakes? Just curious... tia -Gear |
|
|
|
| Bookmarks |
| Thread Tools | |
|
|
|
|
IMPORTANT:Treat everyone here with respect, no matter how difficult! No sex, drug, political, religion or hate discussion permitted here.
The words Fender®, Telecaster®, Stratocaster® and the associated headstock designs are registered trademarks of the Fender Musical Instruments Corporation.
The TDPRI is an independent, member supported forum and is not affiliated with Fender Musical Instruments Corporation.
2 Photos
