 |
|
|
 |
 |
|
 |
||||||||||||
 |
 |
|
|
|
||||||||||||||||||||||
|
|||||||
| Home | Forum | Resources | Shop | Gallery | Classifieds | Reviews | Register | FAQ | Search | Today's Posts | Mark Forums Read |
| Tele-Tech Telecaster nuts and bolts talk ONLY |
 |
|
|
Thread Tools |
February 26th, 2008, 04:49 PM
|
#1 (permalink) |
|
Tele-Meister
Join Date: Jan 2008
Location: Amherst Nova Scotia
Posts: 204
|
what Value am i looking for on a tonebleed?
Hey gang i am doing a wiring upgrade to my Paisley and i ned some info on tone bleed caps ...what value or values am i looking for here is what i have so far and i know that a tonebleed in not necessary but thought i would try it out here is what i have
2 Callaham Heavy Knurled knobs and Tele Control plate 2 CTS 250K Solid Shaft Audio Taper Potentiometers 1 OakGrigsby 3 Way Switch 1 Hovland MusiCap Capacitor .047 uf 1/4" Switchcraft Output Jack i have it all assembled with the Hovland going Green to volume red to tone pot andi am needing /wanting/wondering wether or not i need the tone bleed cap or not thanx for your input gang Lonney B |
|
|
|
| Thread Tools | |
|
|
The words Fender®, Telecaster®, Stratocaster® and the associated headstock designs are registered trademarks of the Fender Musical Instruments Corporation.
The TDPRI is an independent,member supported forum and is not affiliated with Fender Musical Instruments Corporation.
22 Photos
...is there any reasoning for the value? higher valer bigger taper to the bleed lower value a quicker taper ..?
