2009 TDPRI Giveaway Winners List is available HERE

brinbros · November 14th, 2004, 04:57 PM

Installing "like new" but used Fralin stock tele pickups. Bridge works fine, but when I install neck pickup wired the same way the original was, I get no signal. Anyonw have any suggestions?

Thanks.

Freddy Fender · November 14th, 2004, 05:22 PM

The first thing to do would be to measure the pickup with an ohm meter to make sure it is not open or shorted.

Mark Davis · November 14th, 2004, 06:32 PM

Your switch could also be bad hook it to the bridge pickup places on the lugs and if it works you need a new switch. If it doesnt work chances are one of the super thin wires came loose from the coil.

November 14th, 2004, 04:57 PM	#1 (permalink)
brinbros NEW MEMBER! Join Date: Nov 2004 Posts: 1	Question about wiring Fralin pickups - no signal from neck Installing "like new" but used Fralin stock tele pickups. Bridge works fine, but when I install neck pickup wired the same way the original was, I get no signal. Anyonw have any suggestions? Thanks.

November 14th, 2004, 05:22 PM	#2 (permalink)
Freddy Fender Tele-Meister Join Date: Oct 2004 Location: Ontario, Canada Posts: 234	The first thing to do would be to measure the pickup with an ohm meter to make sure it is not open or shorted. __________________ FF

November 14th, 2004, 06:32 PM	#3 (permalink)
Mark Davis Doctor of Teleocity Join Date: Mar 2003 Location: Bakersfield Ca. Age: 59 Posts: 17,155	Your switch could also be bad hook it to the bridge pickup places on the lugs and if it works you need a new switch. If it doesnt work chances are one of the super thin wires came loose from the coil.

2009 TDPRI Giveaway Winners List is available HERE

IMPORTANT:Treat everyone here with respect, no matter how difficult! No sex, drug, political, religion or hate discussion permitted here.