Combining Wiring Diagram - Tele & Lead II

[Pesty]

I've been doing some tinkering with my partscaster, the Telescreamer, [See left] and I replaced the humbucker in the bridge with an Z-90 and so I've got a push-pull pot that was for coil tapping that isn't being used. I also sold my Fender Lead II a while back, but I kind of miss the way the out-of-phase switch could make it cut through a mix, so I thought, hey, why not make the best of both worlds?

Here's what I would like to have:
- Individual Volume Controls
- Bridge Volume Push/Pull changes the bridge pickup to be out of phase when pulled
- Master Tone
- 3 Way blade switch

I've put the Fender Lead II diagram below, but I'm having a little trouble translating it to what I want. Could someone maybe give me some tips/point me to a wiring diagram that already has what I want.



It's been a while since I've been around here, I hope you guys are still as knowledgeable as you were when you helped me build this guitar!

[cc9cii]

Looks straight-forward, I can post a diagram if you'd like.

[Pesty]

I ended up thinking about it most of the day, (while I should have been working...) and came up with my own schematic that bypasses the in/out of phase switching when I'm on just the bridge pickup. I'll clean up my drawing and post it here if anyone in the future is interested.