2009 TDPRI Giveaway Winners List is available HERE

50Rock · July 2nd, 2009, 06:17 PM

Hello fellow musicians!

Can anyone help with the size? I bought my CV 50s Tele in a music store and they didn't have (or couldn't find) the wrench that came with the guitar. I've been experiencing occasional fret buzz.

Thanks!

Tim

Carzee · July 2nd, 2009, 08:42 PM

Welcome Tim - you need that wrench! A lot of people don't see them in the packing and throw 'em out.

..then you need this CV thread off my list:
http://www.tdpri.com/forum/telecaste...on-height.html

LoveBandit · July 3rd, 2009, 10:32 AM

My CV 60's Strat uses a 5mm trussrod wrench. HTH, LB.

50Rock · July 3rd, 2009, 11:33 AM

My theory is I have loose saddle screws on the low E, B strings. The buzz is 3rd fret low E and 4th fret B.

I'll figure it out . . .

July 2nd, 2009, 06:17 PM	#1 (permalink)
50Rock NEW MEMBER! Join Date: May 2009 Location: Dearborn, MI Age: 51 Posts: 7	Alan Wrench Size for Squier CV 50s Tele? Hello fellow musicians! Can anyone help with the size? I bought my CV 50s Tele in a music store and they didn't have (or couldn't find) the wrench that came with the guitar. I've been experiencing occasional fret buzz. Thanks! Tim

July 2nd, 2009, 08:42 PM	#2 (permalink)
Carzee Tele-Afflicted Join Date: Jun 2008 Location: Canbeera Australia Posts: 1,045 24 Photos	Welcome Tim - you need that wrench! A lot of people don't see them in the packing and throw 'em out. ..then you need this CV thread off my list: http://www.tdpri.com/forum/telecaste...on-height.html __________________ Road Worns Classic Vibes Marshalls ... willing workers work wonders

July 3rd, 2009, 10:32 AM	#3 (permalink)
LoveBandit Tele-Meister Join Date: Jan 2009 Location: Northern Virginia - USA Age: 45 Posts: 311	My CV 60's Strat uses a 5mm trussrod wrench. HTH, LB. __________________ Everybody wants to save the earth; nobody wants to help Mom do the dishes. -P.J. O'Rourke Old avatar:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What Allen Wrench size for Fender tele saddle height?	Webfoot	Tele-Tech	2	February 11th, 2009 08:37 PM
hex key / alan wrench size ?	titus	Tele-Tech	1	February 7th, 2009 03:36 PM
What size allen wrench for truss rod of Fender American Tele?	atomheartmother	Tele-Tech	7	February 27th, 2007 08:39 PM
Correct allen-wrench size for MIM Standard tele?	Bill Ashton	Telecaster Discussion Forum	8	May 27th, 2004 02:40 AM
What size wrench for truss rod on Tele (nut on headstock)	NancyK	Telecaster Discussion Forum	2	December 1st, 2003 01:59 AM

July 3rd, 2009, 11:33 AM	#4 (permalink)
50Rock NEW MEMBER! Join Date: May 2009 Location: Dearborn, MI Age: 51 Posts: 7	My theory is I have loose saddle screws on the low E, B strings. The buzz is 3rd fret low E and 4th fret B. I'll figure it out . . .

2009 TDPRI Giveaway Winners List is available HERE

IMPORTANT:Treat everyone here with respect, no matter how difficult! No sex, drug, political, religion or hate discussion permitted here.