 |
|
|
 |
 |
|
 |
||||||||||||
 |
 |
|
|
|
||||||||||||||||||||||
|
|||||||
| Home | Forum | Resources | Shop | Gallery | Classifieds | Reviews | Register | FAQ | Search | Today's Posts | Mark Forums Read |
| Tele-Tech Telecaster nuts and bolts talk ONLY |
 |
|
|
Thread Tools |
May 15th, 2008, 03:43 PM
|
#1 (permalink) |
|
NEW MEMBER!
Join Date: May 2008
Location: Pittsburgh, PA
Posts: 2
|
Need some Help
Hi Gang,
I'm new to the forum, this is awsome, I've really learned alot from the posts. I really need some help. I would like to put a deluxe tele neck, (the one that goes on the Corona body) on my MIM tele. It looks like it has 5 holes in it, the regular 4 and an extra that fits the cutaway Corona Body. Is this possible, I would like to go this route, if possible before purchasing a body and neck, I don't really need the pups or electronics, I've upgraded mine to a SD hot Rail bridge and SD vintage stack in the neck, It sounds awsome. I could sure use some opinions on this thanks drum1mike |
|
|
|
| Thread Tools | |
|
|
The words Fender®, Telecaster®, Stratocaster® and the associated headstock designs are registered trademarks of the Fender Musical Instruments Corporation.
The TDPRI is an independent,member supported forum and is not affiliated with Fender Musical Instruments Corporation.
