Will it work?

storyboards27 · November 3rd, 2009, 05:51 PM

Anyone out there know if I can use this neck plate

on this neck?

Thanks in advance!

joe desperado · November 3rd, 2009, 06:06 PM

Why not? Are you going to use the micro tilt feature? If so, its the right one for sure.

J

mcgeorgerl · November 3rd, 2009, 07:40 PM

I haven't seen a Micro-Tilt taken apart first hand but isn't the neck heel modified with a plate for the tilt feature too?

storyboards27 · November 3rd, 2009, 07:42 PM

I thought it would since the truss rod adjust would be done at the nut. The micro tilt is like a built in adjustable shim, right? Will it work with regular neck screws if I don't go the micro tilt route?

Joefaity · November 4th, 2009, 02:37 AM

I can't see any reason that it wouldn't, should be ok.

spannerman · November 4th, 2009, 06:10 AM

yeah, i put the exact same (i think) neck plate on a random parts neck i got off ebay, it does work without the whole micro-tilt thing but i found the micro-tilt really handy so i went with it in the end.

November 3rd, 2009, 05:51 PM	#1 (permalink)
storyboards27 Tele-Meister Join Date: May 2009 Location: Marietta, Georgia Age: 24 Posts: 111	Will it work? Anyone out there know if I can use this neck plate on this neck? Thanks in advance! __________________ Gibson got me in the game, Fender kept me playin'

November 3rd, 2009, 07:42 PM	#4 (permalink)
storyboards27 Tele-Meister Join Date: May 2009 Location: Marietta, Georgia Age: 24 Posts: 111	I thought it would since the truss rod adjust would be done at the nut. The micro tilt is like a built in adjustable shim, right? Will it work with regular neck screws if I don't go the micro tilt route? __________________ Gibson got me in the game, Fender kept me playin'

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How does this really work?	Brokenpick	Amp Central Station	3	May 12th, 2009 04:08 AM
Fun for your dog while you're at work	hekawi	Bad Dog Cafe	11	March 17th, 2008 10:25 PM
Ever work on anything and never get it right?	ye olde fretmonkey	Bad Dog Cafe	18	May 2nd, 2006 09:36 AM
will this work	popthree	Amp Central Station	7	April 29th, 2006 11:15 PM
Setting up a regular jam at work after work	Dana	Bad Dog Cafe	2	April 27th, 2005 04:30 PM

November 3rd, 2009, 06:06 PM	#2 (permalink)
joe desperado TDPRI Member Join Date: Jan 2009 Location: Chicago Posts: 34	Why not? Are you going to use the micro tilt feature? If so, its the right one for sure. J

November 3rd, 2009, 07:40 PM	#3 (permalink)
mcgeorgerl TDPRI Member Join Date: Sep 2009 Location: Cincinnati, Ohio Age: 54 Posts: 89	I haven't seen a Micro-Tilt taken apart first hand but isn't the neck heel modified with a plate for the tilt feature too?

November 4th, 2009, 02:37 AM	#5 (permalink)
Joefaity Tele-Meister Join Date: Oct 2009 Location: Washington (the good one) Posts: 126	I can't see any reason that it wouldn't, should be ok.

November 4th, 2009, 06:10 AM	#6 (permalink)
spannerman TDPRI Member Join Date: Nov 2009 Location: Sheffield, UK Age: 20 Posts: 30	yeah, i put the exact same (i think) neck plate on a random parts neck i got off ebay, it does work without the whole micro-tilt thing but i found the micro-tilt really handy so i went with it in the end.

IMPORTANT:Treat everyone here with respect, no matter how difficult! No sex, drug, political, religion or hate discussion permitted here.