Show us your Pedal board.

[Tele84-86]

Originally Posted by BLACKCAT69

That´s sure an original pedalboard, BLACKCAT69! Which one of the pedals is overdrive and which one is delay etc.? I guess that the pedal on the right is the volume pedal. Correct?

[Aen]

this is the most recent one i have, but htings have changed, no octave pedal or synth wah, and my DOD analog delay started dying last night =(

A behringer big muff clone was added, then replaced with a russian biig muff, which was quickly replaced with the behringer, and I added an Ibanez fuzz.

Tuner>Ibanez Fuzz>Crybaby>EHX Ring Mod>Blue Box>Bad Monkey>Behringer "Vintage distortion>LIne 6 DL4>Boss loopstation

[KRZ4TELE]

Click on the link to see my pedalboard.

http://i9.photobucket.com/albums/a75...y/Dsc00337.jpg

The fx are mounted on a pedaltrain Jr and transported in the ATA hardcase to gigs. Hookup is quick and easy with the [webmaster edit] product name removed due to threatened legal action[/edit]to go with it. I run the reverb through the FX loop and everything else through the front. I know the chorus and delay should go through the loop but my Marshall 30th anniversary likes these through the front. I have tried many different configurations to get this rig sounding KILLER!

[rkwrenn]

Coming in a bit late on this thread -sorry...



Boss items are a DD-5 Delay and an HR-2 Harmonist. The HR-2 is used on the detune setting. The case is by Core. Got One Spot free with the case from MF last year. Cabling is George-L. I left a loop of cable between the OCD and the HR-2 for an ad-hoc additional effect.

The straight plug cable is the patch cable that goes from the DD-5 to the amp. I set the board up directly in front of the amp so it is behind me when I play.

Good mileage from everything so far.

Cheers,

Bob

[RelicStrat]

Here is my cheesy homemade board thanks to Home Depot. Take my advice, don't any of you buy one of these Fender tuners. They have to be one of the worst things Fender has ever made.

Death By Audio Interstellar Overdriver Supreme (custom built for me by Oliver Ackerman) --> Fulldrive 2 @ 18v --> MXR EQ --> VP Jr. --> Dano Trem --> Boss DD-5 --> Line 6 DL-4 (modded by Robert Keeley for extra goodness) <-- Roland expression pedal (much stronger than the line 6 crap) --> Vox AC30 CC2 & Fender '65 Twin Reverb Reissue. George L's cables all around.

[andy__woods]

Hey Electron, what kind of settings do you have on your AC30 for use with that pedal board? Do you just give it a good clean or what? I'm looking at making a pedal board myself and don't really know where to start or how to use one when its done!

[TieDyedDevil]

[telel6s]

BOSS Tuner > Marshall Ed1 Compressor > Rocktron Austin Gold OD > Barber LTD OD > Marshall VibraTrem. Pedals are secured to pegboard with zip ties. Wood strips glued and screwed to the bottom of the pegboard to give strength and raise it off the floor just a bit. Flat black spray paint with semi-gloss spray poly on top.



Flamed shoes from the clearance rack at Sears.

[hal]

http://i45.photobucket.com/albums/f9...k/P1010056.jpg

All of the Boss stuff is Keeley modified. The BD-2 was on the board while my Monte Allums OD-3 was getting a new light. The Cutec is one of many TS-808type pedals I use in that position. I have my all original square button TS-808 on the the board now. Questions? Comments?

[hal]

Originally Posted by andy__woods

Hey Electron, what kind of settings do you have on your AC30 for use with that pedal board? Do you just give it a good clean or what? I'm looking at making a pedal board myself and don't really know where to start or how to use one when its done!

well...i rarely like a straight clean sound through the ac30. i save that for my twin reverb. i link the channels and have the top boost and normal channels set to about 10 o'clock. that way i get some nice, warm breakup if i hammer the strings. reacts pretty differently if i'm using the '72 tele deluxe or '96 american std tele.

i would start by getting a fulldrive 2 if i were you, then pickup a line 6 delay (dl-4). if those were the only two pedals i had, i could get by.

[txjonc]

[LarryR]

This is my newest version for gigs.I do have a Hucklberry fuzz on the way which will move the wah off the board onto the floor.

[zoppotrump]

I try to keep it as simple as possible. been playing this board now for almost 2 years and still don´t feel any need to change or add something.

tele > korg dt 10 tuner > keeley comp > sparkledrive > zendrive > ibanez ad9 > ernie ball volume pedal > dr.z amp

take care everybody

zoppotrump
:O)

[ramseybella]

I wish I had 1/4th of this stuff my friends collection,Yes it is a sickness!!
http://www.bonepickerguitaramps.com/...ollection.html

[ramseybella]

This is it!!

No just kidding I use a few mainly Maxon Compressor, Boss 7 band EQ, Alisis Nanoverb (for Reverb), Maxon AD-80 Delay some ovedrive!

[msteurbaut]

Originally Posted by ramseybella

I wish I had 1/4th of this stuff my friends collection,Yes it is a sickness!!
http://www.bonepickerguitaramps.com/...ollection.html

I'm thinking about collecting pedals. You can find some good stuff second hand these days.

[tazzboy]

Here is my simple take on pedal boards:

Clean Channel, Reverb and Tremolo are turn on



Crunch channel, Reverb and Tremolo are turn on

[LarryR]

went to a pedaltrain jr. ,pulled the dd-3 & a/bswitch, added the huckleberry and wah goes on the floor now.

[gtrplr2]

This does the trick for me.

[Robbie W]

Nice pedalboard gtrplr2! I am fond of the RGW Electronics stuff myself

The Pistol Pete's are rare, only 20 made.

Here is my pedalboard:


take care,
Robbie Wallace
RGW Electronics

[telecaster69]

Here is my pedalboard I'm working on...I've been assembling this the last couple of weeks or so...I still have to add a MXR Distortion + and I am swapping out the Line 6 Liqua Flange for a Constrictor Gate and getting rid of the Noise Supressor and just using the gate.....any recommendations?

[gtrplr2]

Originally Posted by Robbie W

Nice pedalboard gtrplr2! I am fond of the RGW Electronics stuff myself

The Pistol Pete's are rare, only 20 made.

Here is my pedalboard:


take care,
Robbie Wallace
RGW Electronics

Thanks Robbie! My Pistol Pete is #14, and my Bad Bob is #80. I wish I could get a bigger pic uploaded, but I can not figure out how to do it.

Jeff

[uahaha!!!]

nice!!
im the last one!