Show us your Pedal board. - Page 15

benadrian · June 29th, 2008, 07:42 PM

Quote:

Originally Posted by Essex Boy

Nice Euthymia. Erik, the builder, lives a few blocks from me. Really great guy and expert amp repairman. Buy all his stuff.

Ben

fivenote · July 1st, 2008, 02:41 PM

Here's a more recent shot of my pedalboard. It carries a fender tuner, dyna comp, morley jd-10, mxr smartgate, boss super chorus, and boss rv-3 reverb/delay. I usually use the eurorack mixer and go straight to a pa or powered amps. The awesome tube-amp tone of the jd-10 makes that possible.

I use a large rondo pedalcase. The felt liner didn't stick to velcro well enough and started to lift after a while. So I lined the case with some scrap carpet. Much better.

JoeNeri · July 5th, 2008, 06:28 PM

Dunlop Wylde Wah
MXR Classic 108 Fuzz
MXR GT-OD
MXR Carbon Copy
Boss TU-2
Dunlop Brick

Subbacultcha · July 6th, 2008, 12:55 PM

Guitar-Wah (not pictured)-tonebender-tuner-envelope filter-comp-triboost-mighty mouse-large beaver-shredmaster-trem-delay-Blues Jr... All BYOC except tuner, and delay.

-Subba

junk126 · July 8th, 2008, 08:12 AM

Quote:

Originally Posted by Subbacultcha

Guitar-Wah (not pictured)-tonebender-tuner-envelope filter-comp-triboost-mighty mouse-large beaver-shredmaster-trem-delay-Blues Jr... All BYOC except tuner, and delay.

-Subba

The graphics on your BYOC's are too cool.

How'd you make em?

Subbacultcha · July 8th, 2008, 11:36 AM

Thanks, junk. Laser-jet water slide decals... If you are really interested, go to the BYOC forum: http://www.buildyourownclone.com/board/ and sniff around the "DIY" and "Show off your build threads", lots of info to be had.

-Subba

junk126 · July 8th, 2008, 08:49 PM

Checked out the BYOC forums and couldn't help noticing that the 1st stickie in the DIY section was Yours. Lots of awesome info, and some great work. Thanks again.

vanguard · July 11th, 2008, 12:11 AM

pshuffield · July 11th, 2008, 10:15 AM

I new to the group, but wanted to post my board. So here goes:

Sorry for the photo quality. It's from my cell.

All pedals are mounted to a custom painted Shuffleboards Pedalboard and connected with Pro-El cables. Signal path is as follows:

Guitar -> Visual Sound Volume -> Boss PW10 VWah -> Protone Pedals Mach 2 Booster -> DOD 380 Compressor -> Guyatone WR2 Wah Rocker -> Behringer UC100 Ultra Chorus -> Ibanez DE7 Delay -> Tech 21 Trademark 60. A Boss TU12H Chromatic Tuner is connected to the Visual Sound's Tuner Out. Everything is powered by a Visual Sound 1 Spot with a couple of daisy chains.

I will be adding a tremolo pedal and a chorus/vibrato pedal of some type in the future. I jsut haven't found the right ones yet.

Shuff

"Two wrongs don't make a right, but three rights will make a left"

claudel · July 11th, 2008, 10:36 AM

Old...

New...

Technically not a "pedalboard", but when the floor controller is released it'll be close enough...

Yoni · July 14th, 2008, 05:46 PM

Will take some photo's of my board soon...probably in a few weeks when I have my tremolo pedal built.

junk126 · July 15th, 2008, 09:01 AM

Here's mine.

Gator board w/ Power Supply on the way.

Big Lug · July 15th, 2008, 09:57 PM

Quote:

Originally Posted by junk126

Here's mine.

Gator board w/ Power Supply on the way.

Interesting. Not your average no "frills " board.

Sorry. That was bad.

picker02 · July 15th, 2008, 10:16 PM

the best board are the simple ones, thanks from a country picker

picker02 · July 15th, 2008, 10:18 PM

Quote:

Originally Posted by KnopflerStyle

Do you like country? Because i think that this is the country guitar pedal board. Nothing more, nothing less.

Best Regards...

The best boards are the simple one, thanks from a country picker

gruveb · July 16th, 2008, 12:20 AM

The board itself is under construction, I'm waiting for some components like power supply and stuff.

Anyhow, here it is:

I run it through a THD Univalve with Ted Weber speakers California speakers.

The pedals are:

1. Fulltone Full Drive 2
2. Fulltone OCD version 1
3. Digitech Whammy pedal
4. Ibanez Weeping Demon Wah pedal
5. Dunlop univibe
6. Electro Harmonix Holy Grail Plus
7. Line6 Delay pedal

I also have some other stuff that doesn't fit on the pedal board and that, frankly, I don't use. Anyhow, that's what it is.

junk126 · July 17th, 2008, 12:29 AM

Quote:

Originally Posted by Big Lug

Interesting. Not your average no "frills " board.

Sorry. That was bad.

Well, it's definitely on the "fringe".

studio1087 · July 17th, 2008, 07:42 AM

I'm sticking with this..........

I had an SKB board and I switched to the ElectroHarmonics board because the EH broad is long and narrow. I'm not very tall; I can tap the back row easier on the long narrow board and my looper fit.

I just bought a One Spot deal where you get the One Spot, an 8 pedal cord and a bag of odd connectors ($35 new on ebay) and I had to buy an extra pigtail for 5 pedals. I could power 13 pedal but I have the 10. The One Spot rigs are really nice. Someone was thinking.

Fender Tuner
Marshall ED-1 Compressor
Marshall Reflector Reverb
Marshall VibroTrem Tremolo
Boss SD-1 Overdrive
MXR Phase 90
Digitech Multi Chorus
Ibanez DE7 Delay
MXR EQ (only used with my Valve Junior for top end tweaking))
Boss Looper

mikespe · July 17th, 2008, 11:23 AM

I built myself a new pedalboard in the style of the Trailer Trash boards. It is almost complete. You read about the full build here.

klasaine · July 19th, 2008, 01:48 AM

klasaine · July 19th, 2008, 04:08 PM

Here's another 'little guy' in a Samsonite briefcase ...

jmorrero · July 19th, 2008, 04:35 PM

here is my set up..

rhinocaster · July 19th, 2008, 04:41 PM

No board, but depending on the room I'm playing, I grab a combination of these.

telel6s · July 20th, 2008, 08:29 PM

Most recent incarnation:

Subdecay Flying Tomato Mutant Fuzz
Boss Tuner
Barber LTD overdrive
Rocktron Austin Gold Overdrive
Marshall VibraTrem
DigiTech DigiDelay
Marshall Reflector reverb
One-Spot power supply
scrap pegboard and satin black spray paint

July 1st, 2008, 02:41 PM	#562 (permalink)
fivenote Tele-Meister Join Date: Oct 2004 Location: Brooklyn, NY Posts: 146 4 Photos	Here's a more recent shot of my pedalboard. It carries a fender tuner, dyna comp, morley jd-10, mxr smartgate, boss super chorus, and boss rv-3 reverb/delay. I usually use the eurorack mixer and go straight to a pa or powered amps. The awesome tube-amp tone of the jd-10 makes that possible. I use a large rondo pedalcase. The felt liner didn't stick to velcro well enough and started to lift after a while. So I lined the case with some scrap carpet. Much better. __________________ ~~~~~ fivenote ~~~~~ One day I'll finally have the perfect guitar for me. That's also the day I'll get arthritis. It was a fun ride.

July 5th, 2008, 06:28 PM	#563 (permalink)
JoeNeri Tele-Meister Join Date: Apr 2005 Location: Sedona, AZ Age: 60 Posts: 103 3 Photos	Dunlop Wylde Wah MXR Classic 108 Fuzz MXR GT-OD MXR Carbon Copy Boss TU-2 Dunlop Brick __________________ The blues is my business and business is good.

July 6th, 2008, 12:55 PM	#564 (permalink)
Subbacultcha TDPRI Member Join Date: Feb 2007 Location: Maine Age: 41 Posts: 11	Family photo Guitar-Wah (not pictured)-tonebender-tuner-envelope filter-comp-triboost-mighty mouse-large beaver-shredmaster-trem-delay-Blues Jr... All BYOC except tuner, and delay. -Subba

July 8th, 2008, 08:49 PM	#567 (permalink)
junk126 Tele-Meister Join Date: Aug 2007 Location: Alabama, United States Age: 29 Posts: 114	Checked out the BYOC forums and couldn't help noticing that the 1st stickie in the DIY section was Yours. Lots of awesome info, and some great work. Thanks again. __________________ I'll be more enthusiastic about encouraging thinking outside the box when there's evidence of any thinking going on inside it. -- (Terry Pratchett)

July 14th, 2008, 05:46 PM	#571 (permalink)
Yoni Tele-Meister Join Date: Jun 2008 Location: Arizona Age: 25 Posts: 301	Will take some photo's of my board soon...probably in a few weeks when I have my tremolo pedal built. __________________ Fall in Love it's Fun-EV Check out my band at www.myspace.com/agent355

July 8th, 2008, 11:36 AM	#566 (permalink)
Subbacultcha TDPRI Member Join Date: Feb 2007 Location: Maine Age: 41 Posts: 11	Thanks, junk. Laser-jet water slide decals... If you are really interested, go to the BYOC forum: http://www.buildyourownclone.com/board/ and sniff around the "DIY" and "Show off your build threads", lots of info to be had. -Subba

July 11th, 2008, 12:11 AM	#568 (permalink)
vanguard Tele-Meister Join Date: Feb 2007 Location: disneyland Posts: 292

July 11th, 2008, 10:15 AM	#569 (permalink)
pshuffield TDPRI Member Join Date: Jul 2008 Location: Arkansas Age: 40 Posts: 15	I new to the group, but wanted to post my board. So here goes: Sorry for the photo quality. It's from my cell. All pedals are mounted to a custom painted Shuffleboards Pedalboard and connected with Pro-El cables. Signal path is as follows: Guitar -> Visual Sound Volume -> Boss PW10 VWah -> Protone Pedals Mach 2 Booster -> DOD 380 Compressor -> Guyatone WR2 Wah Rocker -> Behringer UC100 Ultra Chorus -> Ibanez DE7 Delay -> Tech 21 Trademark 60. A Boss TU12H Chromatic Tuner is connected to the Visual Sound's Tuner Out. Everything is powered by a Visual Sound 1 Spot with a couple of daisy chains. I will be adding a tremolo pedal and a chorus/vibrato pedal of some type in the future. I jsut haven't found the right ones yet. Shuff "Two wrongs don't make a right, but three rights will make a left"

July 11th, 2008, 10:36 AM	#570 (permalink)
claudel Tele-Holic Join Date: Apr 2005 Location: Just Outside Area 51 Posts: 597 28 Photos	Old... New... Technically not a "pedalboard", but when the floor controller is released it'll be close enough...

July 15th, 2008, 09:01 AM	#572 (permalink)
junk126 Tele-Meister Join Date: Aug 2007 Location: Alabama, United States Age: 29 Posts: 114	Here's mine. Gator board w/ Power Supply on the way. __________________ I'll be more enthusiastic about encouraging thinking outside the box when there's evidence of any thinking going on inside it. -- (Terry Pratchett)

July 15th, 2008, 10:16 PM	#574 (permalink)
picker02 TDPRI Member Join Date: Apr 2004 Location: Lake Eufaula.Oklahoma Age: 54 Posts: 24	the best board are the simple ones, thanks from a country picker

July 16th, 2008, 12:20 AM	#576 (permalink)
gruveb TDPRI Member Join Date: Apr 2008 Location: Rio Rico, Arizona Posts: 11	The board itself is under construction, I'm waiting for some components like power supply and stuff. Anyhow, here it is: I run it through a THD Univalve with Ted Weber speakers California speakers. The pedals are: 1. Fulltone Full Drive 2 2. Fulltone OCD version 1 3. Digitech Whammy pedal 4. Ibanez Weeping Demon Wah pedal 5. Dunlop univibe 6. Electro Harmonix Holy Grail Plus 7. Line6 Delay pedal I also have some other stuff that doesn't fit on the pedal board and that, frankly, I don't use. Anyhow, that's what it is.

July 17th, 2008, 07:42 AM	#578 (permalink)
studio1087 Friend of Leo's Join Date: May 2003 Location: Near Milwaukee Age: 44 Posts: 3,578 36 Photos	I'm sticking with this.......... I had an SKB board and I switched to the ElectroHarmonics board because the EH broad is long and narrow. I'm not very tall; I can tap the back row easier on the long narrow board and my looper fit. I just bought a One Spot deal where you get the One Spot, an 8 pedal cord and a bag of odd connectors ($35 new on ebay) and I had to buy an extra pigtail for 5 pedals. I could power 13 pedal but I have the 10. The One Spot rigs are really nice. Someone was thinking. Fender Tuner Marshall ED-1 Compressor Marshall Reflector Reverb Marshall VibroTrem Tremolo Boss SD-1 Overdrive MXR Phase 90 Digitech Multi Chorus Ibanez DE7 Delay MXR EQ (only used with my Valve Junior for top end tweaking)) Boss Looper __________________ JLG Carry On

July 19th, 2008, 01:48 AM	#580 (permalink)
klasaine Tele-Afflicted Join Date: Nov 2006 Location: los angeles, ca Age: 46 Posts: 1,257 3 Photos

July 19th, 2008, 04:08 PM	#581 (permalink)
klasaine Tele-Afflicted Join Date: Nov 2006 Location: los angeles, ca Age: 46 Posts: 1,257 3 Photos	Here's another 'little guy' in a Samsonite briefcase ...

July 19th, 2008, 04:35 PM	#582 (permalink)
jmorrero TDPRI Member Join Date: Jun 2006 Location: Quezon City, Philippines Age: 30 Posts: 33 1 Photos	here is my set up.. __________________ http://www.soundclick.com/bands/page...?bandID=540797 Last edited by jmorrero : July 31st, 2008 at 06:24 AM.

July 19th, 2008, 04:41 PM	#583 (permalink)
rhinocaster Tele-Afflicted Join Date: Sep 2006 Location: Oregon Age: 44 Posts: 1,168	No board, but depending on the room I'm playing, I grab a combination of these. __________________ Just because I "Don't" get it doesn't mean I "Won't" get it!

July 20th, 2008, 08:29 PM	#584 (permalink)
telel6s Tele-Afflicted Join Date: Jun 2003 Location: Northern Virginia Posts: 1,154 80 Photos	Most recent incarnation: Subdecay Flying Tomato Mutant Fuzz Boss Tuner Barber LTD overdrive Rocktron Austin Gold Overdrive Marshall VibraTrem DigiTech DigiDelay Marshall Reflector reverb One-Spot power supply scrap pegboard and satin black spray paint __________________ Mama always said, "A little tone is good for the soul."