Securing Guyatone Micro Series to Pedalboard

[Midgekey]

Has anyone come up with some effective methods for securing a Guyatone Micro Series pedal to a pedalboard?

I'm using Velcro & when I try to move the pedal, the bottom cover slips off & remains stuck to my board. (For those who are unfamiliar with these pedals, the bottom cover is just held onto the pedal housing by a rubber gasket.)

I've thought about using a cable tie to secure the bottom to the rest of the pedal, but was hoping someone else might have developed a more elegant solution.

Thanks for your time,

[WrapAround]

Originally Posted by Midgekey

Has anyone come up with some effective methods for securing a Guyatone Micro Series pedal to a pedalboard?

I'm using Velcro & when I try to move the pedal, the bottom cover slips off & remains stuck to my board. (For those who are unfamiliar with these pedals, the bottom cover is just held onto the pedal housing by a rubber gasket.)

I've thought about using a cable tie to secure the bottom to the rest of the pedal, but was hoping someone else might have developed a more elegant solution.

Thanks for your time,

I've been using nylon zip-ties to secure my boxes to the board. I'd drill 2 or 4 holes depending on how many "straps" are needed and zip them up.