2009 TDPRI Giveaway Winners List is available HERE

biker joe · October 31st, 2009, 05:22 PM

Anyone have a resource for MXR bottom plates to fit on older mxr pedals? I know they used to be acouple of people who sold them on ebay but I can't find any right now. Thanks.

czech-one-2 · October 31st, 2009, 07:34 PM

looking for one myself that enables you to use an adapter without drilling. But that seller on ebay appears to be long gone.

biker joe · October 31st, 2009, 08:08 PM

If you want one that has an adaptor, you can get one of the small zvex ones. I know they sell them at pedalgeek or analogman. These are $39. I was hoping for a source for just a plain plate.

czech-one-2 · October 31st, 2009, 08:23 PM

no,I was refering to those black MXR bottom plates with a hole in em',so you can attatch an adapter with a battery snap connector and run the old 9v battery powered pedals with a pedalboard power supply.
If your wanting a plain plate,keep searching ebay as an MXR script distortion + plate just sold last week for $15.00.

sometimes you'll see an empty shell or 'project' pedal as well,but they dont come around too often,you'll have to be patient, or lucky, or both!

Joe-Bob · October 31st, 2009, 08:50 PM

Got skills? Make some!

czech-one-2 · November 1st, 2009, 05:13 AM

Quote:

Originally Posted by Joe-Bob

Got skills? Make some!

LOL........you mean ''got a vise and a metal saw?''

In my case ........no

Funny you would suggest that though,cause at this very moment I'm having an old Boss plate trimmed down to fit my Univox 'foot faser',its a perfect fit,even 2 of the holes,just an 1/8'' of an inch too wide.

October 31st, 2009, 05:22 PM	#1 (permalink)
biker joe Tele-Meister Join Date: Apr 2003 Posts: 342	Anyone know where to get MXR bottom plates? Anyone have a resource for MXR bottom plates to fit on older mxr pedals? I know they used to be acouple of people who sold them on ebay but I can't find any right now. Thanks.

October 31st, 2009, 08:50 PM	#5 (permalink)
Joe-Bob Poster Extraordinaire Join Date: Sep 2004 Location: Dallas, Texas Age: 47 Posts: 5,531	Got skills? Make some! __________________ Why didn't the Psychic Network already know I was gonna call?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How do i get the radius on the bottom of my nut?	scubadoo	Tele-Tech	12	September 19th, 2008 11:06 PM
Black bottom/ grey bottom pickups	58Bandmaster	Just Pickups	4	March 11th, 2006 04:30 AM
I need a tight bottom end!	TheGoodTexan	Amp Central Station	25	March 17th, 2005 09:32 AM
How to get more bottom end.	99miles	Tele-Tech	7	February 12th, 2004 05:33 AM
the bottom end	bek	Worship Service Players	8	September 4th, 2003 10:08 AM

October 31st, 2009, 07:34 PM	#2 (permalink)
czech-one-2 Tele-Meister Join Date: Oct 2008 Location: Prague via So. Cal Posts: 289	looking for one myself that enables you to use an adapter without drilling. But that seller on ebay appears to be long gone.

October 31st, 2009, 08:08 PM	#3 (permalink)
biker joe Tele-Meister Join Date: Apr 2003 Posts: 342	If you want one that has an adaptor, you can get one of the small zvex ones. I know they sell them at pedalgeek or analogman. These are $39. I was hoping for a source for just a plain plate.

October 31st, 2009, 08:23 PM	#4 (permalink)
czech-one-2 Tele-Meister Join Date: Oct 2008 Location: Prague via So. Cal Posts: 289	no,I was refering to those black MXR bottom plates with a hole in em',so you can attatch an adapter with a battery snap connector and run the old 9v battery powered pedals with a pedalboard power supply. If your wanting a plain plate,keep searching ebay as an MXR script distortion + plate just sold last week for $15.00. sometimes you'll see an empty shell or 'project' pedal as well,but they dont come around too often,you'll have to be patient, or lucky, or both!

2009 TDPRI Giveaway Winners List is available HERE

IMPORTANT:Treat everyone here with respect, no matter how difficult! No sex, drug, political, religion or hate discussion permitted here.