help needed on fender cyber foot controller

[Steve Hayes]

I am currently trying to use a fender cyber foot controller.
Am playing though a cyber twin se.
I have no idea how to do this.
Does anyone know how to set one up or set up the banks in in the cyber twin se.
Is there a website that give me a walkthrough or a how to.
If there is someone that can help I would greatly appreciate it.

Steve

[MartyGrant]

Steve.

You have either figured this out by now, got some help or have now read a manual. In case none of these applies I'll try and help....these steps will PROBABLY work for your Twin, but no promises as I have a Cyber Deluxe.

1. Select preset # you want to assign to a footswitch button with the Data wheel.
2. Press UTILITY once and "Ft" will appear. ALL FOOTSWITCH LED's will flash...(except any you've assigned already...then those LED's will stay on.)
3. Select the Footswitch button (1,2,3,or 4) and store the assignement. 2 ways.
(a) Turn DATA wheel to illuminate FOOTSWITCH LED then press TAP button.
OR
(b) just press the footswtich button.

Get beyond the presets and manual mode into Advanced Editing and a whole new level of tone sucks you in. Your twin with tube has to be the most under appreciated Fender amp ever made. IT TAKES DAYS BEFORE ONE LEARNS HOW TO DIAL IN THESE BABIES....no mess-around in a store is ever long enough. Heck, it takes days just to stop messing with the presets and read the 42 page "Operating Instructions".