 |
 |
|
| Supporting Vendors | ||||||
 |
 |
 |
 |
 |
 |
 |
| advertise on the tdpri | ||||||
|
||||||||||||||||||||||||
|
|||||||
| The BASS Place Talk about Bass guitars and the low end of the scale. |
 |
|
|
Thread Tools |
September 14th, 2012, 03:44 PM
|
#1 (permalink) |
|
Tele-Meister
Join Date: Mar 2012
Location: thorne bay alaska
Age: 69
Posts: 475
|
Telecaster Guitar parts To Fit Bass build.
This is a question for the guitar players in the audience. I will be using a telecaster guitar PU cover ( & bridge cover) plate over a single coil SD . The PU is screwed to the plate. Neither the PU or the plate come with screws. Where can i find the screws to attach pickup to cover plate? Screws to attach the joined unit to body are not a problem. I think same screws as used to hold Pbass bridge & PU guards will work just fine there. Anyway let me know what you know will work from personal experience. PMs are fine as well. Thanks & take care. Bob
__________________
Touching Basses Photo Gallery: http://northland.smugmug.com/Music/B...4544&k=hGBcmfK Last edited by robert spencer; September 14th, 2012 at 05:50 PM. |
|
|
|
| Bookmarks |
| Thread Tools | |
|
|
|
|
IMPORTANT:Treat everyone here with respect, no matter how difficult! No sex, drug, political, religion or hate discussion permitted here.
The words Fender®, Telecaster®, Stratocaster® and the associated headstock designs are registered trademarks of the Fender Musical Instruments Corporation.
The TDPRI is an independent, member supported forum and is not affiliated with Fender Musical Instruments Corporation.
