March 26th, 2007, 03:10 PM
I just put a set of GFS lil' punchers in my tele and have found that I am having problems getting an even string response without radically radiusing the strings over the pickup (the high E is especially quiet). Has anyone run into this problem or come up with any solutions?
March 26th, 2007, 06:19 PM
And how close is the High E, and the rest of the strings, to the pup? I can't see from here ;-)
March 26th, 2007, 06:34 PM
No experience, but you'll see many posts referring to this very problem here and at TGP. I don't necessarily think there IS a solution, other than doing what you're doing. Bardens, which these are supposedly based on, usually have 500k or 1meg pots vs. the standard 250k. Good luck!
March 26th, 2007, 06:51 PM
this isn't going to be helpful, but the set I got works just fine. In fact, from a strictly visual perspective, the high and low e should be weaker, but they aren't. Not sure how I lucked out. I hope you find a solution though!
March 26th, 2007, 06:52 PM
Hum.. I thought Rails did not have balance problems...
March 26th, 2007, 11:58 PM
I know that GFS now has a wider "EX" series Puncher, or something like that made for US model string spacing versus import. I imagine you could email Jay and see if he'd let you trade.
March 27th, 2007, 12:01 AM
It's actually called the "XL". Hope this helps.