telel6s
December 18th, 2006, 01:46 PM
I've got a Taylor Baby where the back of the bridge is starting to pull up. So I'm looking into doing the fix myself, because to pay a professional to do it might cost over half the value of the guitar.
I've found several good step-by-step instructions including pictures on the good ol' internet. It definitely seems within my skills to do this. But I wanted to ask a couple of questions if anyone can jump in. Thanks in advance.
1) Applying heat to remove the bridge: All the instructions/pictures I found show luthiers using a special steam heat source with shaped end to fit directly over the bridge; some had a metal end and others were a rubber steam fitting. Is there some other (i.e. cheaper) way to do this? If I protected the top of the guitar with something like those silicone oven mits and then used a hairdryer directly on the bridge, would that provide enough heat to soften the glue to pull it up?
2) Hide glue: It seams that this is the traditional glue to use. Are there any other reasonable glues that can be used -- like Elmer's white or wood glue? I could order hide glue on line, but just thought I would check.
Thanks again.
Joe
I've found several good step-by-step instructions including pictures on the good ol' internet. It definitely seems within my skills to do this. But I wanted to ask a couple of questions if anyone can jump in. Thanks in advance.
1) Applying heat to remove the bridge: All the instructions/pictures I found show luthiers using a special steam heat source with shaped end to fit directly over the bridge; some had a metal end and others were a rubber steam fitting. Is there some other (i.e. cheaper) way to do this? If I protected the top of the guitar with something like those silicone oven mits and then used a hairdryer directly on the bridge, would that provide enough heat to soften the glue to pull it up?
2) Hide glue: It seams that this is the traditional glue to use. Are there any other reasonable glues that can be used -- like Elmer's white or wood glue? I could order hide glue on line, but just thought I would check.
Thanks again.
Joe
![$vboptions[bbtitle]](../../gifs/tdpr-headTRANS.gif)