$vboptions[bbtitle]



Instructional video wanted to rewire 52 AVRI

tedduddy
August 10th, 2012, 03:24 PM
Hi folks. Any of y'all out there have information or access on this conversion? Thank you kindly.

Leon Grizzard
August 10th, 2012, 03:53 PM
I'm no electronics surgeon, but I've done it three times; successfully on two. Just kidding. It's pretty easy. My biggest tip is to just remember you disconnect all the wires on the lugs on the switch, and the capacitor that that connects to the lugs. Then just follow the diagram for the standard three way switch on the TDPRI Resources in the box at the bottom of the page. I spent too much time comparing the 52 wiring diagram with the modern. You don't need the 52 wiring diagram. Just take everything off.