Anyone ever replaced a neck on a CV 50's Squire Tele? (advice needed)

Hey folks,
So I've been shopping around and trying out lots of axes recently, but I've come to realise that I really need a custom built neck.
Anyway, rather than pay out for an entirely new guitar, I've decided the best way forward is to get a neck for my CV 50's Squire tele.
My only concern is wether or not the measurements (neck pocket / bolt holes etc) are the same standard measurements for all Fender Teles.
I'd hate to order the neck only to find it does'nt fit.

Will I have any issues ?

I don't think you'll have any issues. I had my tech put an Allparts neck on mine, and he didn't have to shave anything off the neck or body, and I've read of other folks on here doing the same thing. The CV's seem to work with standard Fender measurement parts.

I don't think you'll have any issues. I had my tech put an Allparts neck on mine, and he didn't have to shave anything off the neck or body, and I've read of other folks on here doing the same thing. The CV's seem to work with standard Fender measurement parts.

Great - thanks for the info

I replaced the neck on my CV50s with a Fender Blacktop Tele neck. A perfect fit! :grin: