August 2nd, 2012, 04:25 AM
This may be the dumbest or most obvious question, but I just got a SF champ and would like to try a couple of cabs that I've got, but where are you guys finding an RCA (or vintage cable) to 1/4" speaker cables to fit the speaker input?
August 2nd, 2012, 05:13 AM
You can get an RCA to 1/4" adapter at RadioShack, but it's not too hard to solder a 1/4" connector to one end of a RCA connector. Do a Google search on making a DIY RCA to 1/4" cable.
August 2nd, 2012, 05:16 AM
I guess it's the same for single speaker connections in the vintage amps as well. Use an RCA to dual spade tip and speaker wire and do it yourself?
August 2nd, 2012, 05:25 AM
Just keep your ohms right (4ohms or so.) with whatever cab. Lamp cord works too. Double-check with other sources first before you do anything. I break things a lot.