$vboptions[bbtitle]



Neck Replacement Question

Redline Redneck
July 31st, 2012, 12:44 PM
Body is a MIM 72 custom reissue from 2004. Three bolt neck.

Can a large profile "U" shaped maple neck be found for this body?

Thanks for the read.

KokoTele
July 31st, 2012, 12:52 PM
You won't find a stock one on the used market, but most new necks come without the holes drilled so you can set it up for 3 or 4 bolts, or whatever.

You could also convert the body to take a standard 4 bolt neck pretty easily, and that gives you lots of options on the used market as well.