July 31st, 2012, 12:15 PM
I was wondering if anyone has a pdf of a La Cabronita body with Tv Jones routs and American Standard bridge with 2 1/16 spacing?
Also, what depth would I rout the rear control cavity?
Is there anyone here that can scale the photo in CAD?
Appreciate any help.
July 31st, 2012, 06:36 PM
What thickness is the body going to be? I'm guessing 17/8''. I'd leave 1/4" left in the control route. I have the cab templates on a flash drive. Pickguard and everything. Am standard bridge. Problem is my computer crashed. I'd be more than happy but I'm posting with an android app. I'll watch this thread. If no one gets you what you need I'll use a buddies computer to load them. Sorry I can't help you now.
July 31st, 2012, 06:53 PM
Thanks for the reply Justin.
July 31st, 2012, 06:55 PM
I have a DXF of a La cab I made from the Ehawley/TDowns drawing...thanks again boys! That may very well be the best contribution this forum has ever had.
It used a modern filtertron, not a tvjones, and a hardtail. If you want it, send me a pm with an email address so I can attach the file.
You'll obviously need some software that will open it. Since it is the one pickup version, you'll have to copy and paste the pickup rout into position and adjust the pickguard accordingly.
September 11th, 2012, 09:54 AM
Hi Friend of Leo's
My name is Josh. I'm an Australian living in Indonesia. I read on one of the threads that you have a La Cab DXF file. I was wondering if you would be kind enough to send me a copy so I could build a La Cab. I have been looking for drawings/blueprints everywhere but haven't had any luck whatsoever until I found this thread. Hopefully my luck will change :-) I will be eternally gratefull!
Joshua James Standen