July 7th, 2012, 10:54 PM
Anyone point me in the right direction to get a simple wiring diagram for a single humbucker guitar with a on/on mini switch that will simply switch between single coil and humbucker mode? It's probably simple, but I don't know how to do it.
July 7th, 2012, 11:42 PM
Here you go: http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1hum_1vol_1tone_split
Although what might be even cooler is a north coil/humbucker/south coil on/off/on switch like this: http://www.**********************/product/WD1H10_03/Guitar-Wiring-Diagram-1-Humbucker1-VolumePull-for-South-Single-Coil.html
Or even cooler would be a series/split/parallel switch: http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=ssp
July 8th, 2012, 12:34 AM
Perfect. Thanks! Never really liked the sound of parallel. That might be interesting to do north coil, south coil and series though. I wonder if there would be too much of a sound difference between north and south coils. I already have an on/on switch though, so I'm going to be series/south coil.
July 8th, 2012, 12:40 AM
That seymour duncan diagram is for a push pull pot. The underside of a mini switch looks just like that though. Do you think that the wiring is all the same?
July 9th, 2012, 05:17 AM
Yes, the mini switch will work electrically the same way as the pull switch.
July 9th, 2012, 11:05 PM
So I followed this diagram and it worked beautifully. I have a single humbucker axe with a 2 way mini switch for humbucker and single coil. However, it is the north coil that remains on when in single coil mode. What could I have done differently so have it be the south coil that remains on instead?
July 9th, 2012, 11:12 PM
Actually, scratch that. I altered that diagram and did this:
July 10th, 2012, 12:37 AM