GFS Mean 90s Wiring

I will be putting a set of Mean 90s in my Epi Les Paul. Is it ok for me to use this Phat Cat wiring diagram? http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2phatcats_2vol_2t_3way2
Obviously the pickup wires are different but will all be well if I use this? Thanks ahead.

That's fine. You don't need any rewiring, just put the new pickups where the old ones were, hot to the volume pot, ground to the back of the pot.

Thanks! I want to replace all the cheap electronics though so I'm going to do a whole rewire. Thanks for the help!

If that's the case, make sure to research all the possibilities! For that kind of setup, I've found I like linear volume pots and audio taper tone pots wired in 50s style. If course, this only matters of you like tweaking the controls while playing...

If that's the case, make sure to research all the possibilities! For that kind of setup, I've found I like linear volume pots and audio taper tone pots wired in 50s style. If course, this only matters of you like tweaking the controls while playing...

+1 !