Kaoss Pad Guitar Mod Trim Blueprint

Hey Everyone,

I've been installing a Korg KAOSS Pad KP-2 in my Telecaster, and have gotten to the step of fabricating a trim piece that will serve two purposes:
1. Hold the unit in the body of the guitar
2. Serve as a cosmetic trim piece

I know many of you have expressed interest in getting a copy of the finalized CAD file, which you can upload to Ponoko, or any such fabrication website. After much experimentation, I am happy to say I've got a great model, free for your use!

Here are some pics:

Body rout:

http://3.bp.blogspot.com/-ePQy-V9u_2o/T-B_E5VDEqI/AAAAAAAACXw/bmd5InYYEG8/s400/b.jpg

Kaoss Pad Test Fit:

http://2.bp.blogspot.com/-kwYg_YCnc2Y/T-CAKG9A_EI/AAAAAAAACX4/8FmiKzt5r0w/s400/2.jpg

Trim Piece Test Fit:

http://3.bp.blogspot.com/-eQHQkc0fLfo/T-CA0vjZ7DI/AAAAAAAACYA/Ck-TLDLYD8Y/s400/1a.jpg

If you are interested in downloading a copy of my design file, just visit the post here (http://www.hellecaster.com/2012/06/new-and-improved-kaoss-pad-kp-2-guitar.html). Remember - this is completely free, with a non-commercial open license to modify as you see fit. Enjoy!

Super cool! You should throw a Monotron in there while you're at it!



(i have the Monotron Delay. It's a lot of fun)

Super cool! You should throw a Monotron in there while you're at it!



(i have the Monotron Delay. It's a lot of fun)

Hey, that would make for an interesting project. I was actually thinking of doing a Telecaster with a Zvex Wah Probe sensor, for the next one... :)

I saw a guy on Youtube who just velcro'd his Monotron below the bridge.


So, that'd be a pretty easy way to do it!


Wah Probe or Fuzz Probe would be awesome