Tapped esquire wiring

Hi everybody,new member here.
I was lost for years thinking gibsons were superior to fenders.Then i finally met the telecaster,I have found the perfect instrument.I really love esquires so ,i
I am converting my mim to a esquire.I installed a klein tri-state pickup with 3 taps.Amazing sound sooo responsive.The taps are 5.4,6.7,8.3 .The tone control on the 5.4 tap works all the across the pots range, very acoustic like sound.the 8.3 tap has much more bass and the tone pot only works about a third of the throw before mudding out, but roll of a point or two and you get a fat tone that overdrives awsome. The 6.7 tap sounds best wide open.So here is my question,I have the three taps hooked to my three way selector all on one side and all through the tone and volume section.I want to by pass the tone on the 6.7 tap that way i can pre set two different rolled off tones on the other taps.I suspect this is a easy mod,but there is nothing on the web with this set up.So if one of you wiring gurus could chime in the help would be greatly apreciated.I will go find a diagram of my current wiring and post it.thx

PM deaf eddie. He'll draw it up for you.

Cool thx dude.