dearmond help

hello there!

i got a dearmond m75t i would like to know where i can get the hardware for the pickguard.

also


i changed de tune o matic bridge for a wilkinson roller one because 2 saddles where broke. also i replace de pots (i used flebay chienese ones):oops: . what other improvements i can do to her?

The only hardware you need for the pickguard are two screws and a plastic grommet for the lower screw to raise the pickguard up from the body of the guitar. You should be able to get that from any hardware store.

My only suggestion is WD Music.com for a wide range of pickguards.

I did up an M75T and played it for years. Great guitar. Used really good pots, made a huge difference. Also had a treble bleed mod done on the neck p/u. Perhaps the pots alone would have been enough. Problem being in stock form it got pretty mushy on the neck p/u only position with volume rolled off. The other adjustment that really helped was a graphite nut, nut sauce on the bridge contact points. The Digsby is stiff, but turned out to be very precise, stable in tuning too.

MD