Do I need anything special for this series/parallel wiring?

http://www.acmeguitarworks.com/Asset...s-Parallel.pdf

Sorry about the link, but photobucket won't upload it as a pdf and I couldn't copy/paste the image.

Do I need a special pot for the lowest "Tone" control position? The way it is marked it looks like standard Strat pots and switch with a dramatic, but easy change in wiring.

I had a Fender The Strat for over 27 years and always liked the series combinations and this would be great if I can wire up one of my Strats like this! I just want to make sure I am not missing something I need as a special part.

Thanks.

bad link

http://www.acmeguitarworks.com/Assets/pdf/CF_Diagram_ISSUE-SUPERSEDE_Strat_Series-Parallel.pdf

That link works.

They're all vanilla 250k pots in that drawing. But have a read of this.

http://www.strat-talk.com/forum/tech-talk/45220-wiring-help-needed-strat-series-blender.html

Is there a way to do that mod that puts the neck and bridge in series?

Is there a way to do that mod that puts the neck and bridge in series?

I have a few different wiring setups that wil give you the Neck & Bridge in series on the Strat page of my wiring diagram library. One uses a Super Switch, the others use the standard 5-way. Here are a few links:


https://sites.google.com/site/phostenixwiringdiagrams/strats#stratsp3


https://sites.google.com/site/phostenixwiringdiagrams/strats#StratNeckSeriesP-P


https://sites.google.com/site/phostenixwiringdiagrams/strats#StratNeckSeries5P-P


https://sites.google.com/site/phostenixwiringdiagrams/strats#strat9-way

Thanks. Those are some good schematics!