![$vboptions[bbtitle]](../../gifs/tdpr-headTRANS.gif) |
||
|
|
GGG ITS808 Build Clipping LED Questionr.jones1116 April 15th, 2012, 03:50 PM One of the clipping sections has two red LEDs. How are they orientated? Negative leg to the square pad or positive leg to the square pad? sirbergersworth April 16th, 2012, 12:01 AM I will have to have a look when I get home. Give me a bit. Sent from my iPhone using TDPRI SngleCoil April 16th, 2012, 10:44 AM Shouldn't matter, there are two of them, right? Just make sure each one is flip-flopped from the other. Just put the negative leg in the square pad and you'll be good. sirbergersworth April 16th, 2012, 07:25 PM One of the clipping sections has two red LEDs. How are they orientated? Negative leg to the square pad or positive leg to the square pad? I have the positive lead in the square on mine and it works great. You may be able to see it in my pic below. 123929 Sent from my iPhone using TDPRI r.jones1116 April 16th, 2012, 10:57 PM That's what I thought it should be but wasn't sure. JD from GGG confirmed longer leg of LED to square pad. Thanks for the pic sirbergersworth April 16th, 2012, 11:35 PM Glad you got it sorted out. Let us know how she turns out. Which mods are you doing? Sent from my iPhone using TDPRI r.jones1116 April 17th, 2012, 03:18 PM Im putting it together for a friend. He prefers to keep it stock for the most part. I think i have enough parts on hand to do the mods as per the GGG sheets if he should want. Might just surprise him DC Music April 21st, 2012, 06:37 AM This is such a great pedal. I did the Expensive Boutique Mods & switchable clipping modes, and it's worked out to be an AMAZING boost pedal in the "diode lift" mode, with the drive turned right down & the level turned right up. It's not a pure clean boost, it's more like a "juicer"... a boost without too much dirt, but with that classic tubescreamer juice. It's spectacular in that mode. I don't end up using the pedal much for "dirt" at all after I found that setting! sirbergersworth May 2nd, 2012, 08:27 AM This is such a great pedal. I did the Expensive Boutique Mods & switchable clipping modes, and it's worked out to be an AMAZING boost pedal in the "diode lift" mode, with the drive turned right down & the level turned right up. It's not a pure clean boost, it's more like a "juicer"... a boost without too much dirt, but with that classic tubescreamer juice. It's spectacular in that mode. I don't end up using the pedal much for "dirt" at all after I found that setting! I agree completely. My favorite TS for sure. Here is a pic of my completed pedal. Its8 on left. Stratoblaster "coppertone" on right. 126099 Sent from my iPhone using TDPRI r.jones1116 May 2nd, 2012, 10:52 AM Here's what I turned out sirbergersworth May 2nd, 2012, 12:03 PM Here's what I turned out What boost did you put in there? Sent from my iPhone using TDPRI r.jones1116 May 3rd, 2012, 10:41 AM The LB-1 circuit. |
|