Squier Strat Bridge

Which Bridge should I replace my squire affinity strat?

- Stetsbar with or without Graph Tech Ghost Saddles
- Fishman Powerbridge VMV
- Tremorbender with or without Graph Tech Ghost Saddles
- Trem-King
- Super-Vee Blade Runner
- Super-Vee Super V
- PRS Tremolo
- Bigsby with Chet Atkins Trem Arm

Why are you investing so much in an affinity??
For a standard kind of trem I would go with the bladerunner for sure.

Do you use trem alot?

not currently because current tremolo was to heavy

What does "too heavy" mean?

to hard to use

How many springs are being used and have you tried adjusting the tension on the claw?

not currently because current tremolo was to heavy


Just to let you know the stock trem is lighter than any replacement one.

It isn't the "weight" (???) its how the trem is setup.
Check the screws that hold in the bridge, they should be out enoughto let the trem move. Also if you have 5 springs take out the 2nd and 4th spring. If you have 3 take out the middle one. Don't forget to check the trem claw this is what controls the tension of the springs. Loosen them if you need to.

Iy-F7iSIopA