Washburn XB125: Phat II EQ Mod

A. Before Phat II EQ Mod
Here's a Washburn XB125 bass with neck pickup volume, bridge pickup volume and master tone controls.


http://2.bp.blogspot.com/-zyPIoYq1FRo/T2z2MT_AW3I/AAAAAAAABCg/Z3jVEIQFn8Q/s1600/xb125_dimarziotone.jpg
Controls Layout


http://1.bp.blogspot.com/-BOMDVsUn0r4/T2z3vYYDFFI/AAAAAAAABCo/5D842CQYD-g/s1600/xb125_dimarziotone02.jpg
Control Cavity



B. After Phat II EQ Mod
Here's the same bass after the following changes:
Alpha 500K pots (master volume / master tone)
3-way toggle switch (pickup selector)
Ibanez Phat II EQ Board
9V battery / battery clip
DPDT switch (bypass)
Stereo output jack
Aluminium foil shielding
Complete rewire
Ground tab from volume pot casing to control cavity shielding



http://4.bp.blogspot.com/-XOPzUy9dAWM/T10POla1n_I/AAAAAAAABB0/x1f_P7gA82c/s1600/0002.jpg
Controls Layout
Clockwise from top left: Phat II EQ, PU Selector Toggle Switch, Phat II EQ Bypass Switch, Master Tone, Master Volume


http://3.bp.blogspot.com/-k6gtZj0D-uE/T1TzgiOUQCI/AAAAAAAAA9U/sa7LtTZxWUo/s1600/0002.jpg
Control Cavity


http://4.bp.blogspot.com/-t7qnvaSjbnk/T2k5lAYuXTI/AAAAAAAABCY/yiuhg4EiipI/s1600/XB125_Wiring_Diagram.jpg
Wiring Diagram