Telepickens
March 10th, 2012, 12:35 PM
My MJT tele body and neck is arriving this week. I have purchased all the hardware, as well as a SD neck humbucker and Jerry Donahue bridge pickup. The only thing missing is pots, caps and wiring. I admit, this is an area that I have little knowledge in.
I have been reading like a fiend trying to put together a list of things to take to my tech, but I'd like to get your take on what would work best. Keep in mind I want to keep it simple - no S1, 5-way, push pull rocket launchers etc. I'm looking for a simple 3-way using this control switch, that volume and tone pot, this brand capacitor rated at.....cloth wire... . Also, not to contradict myself, the best wiring scheme for a neck bucker/bridge single coil. I have read a lot about tone only to the bridge and that seems to make sense.
I know that these parts are in general pretty cheap, so go ahead a list the best of each. Not looking to save a few pennies, because going cheap here probably would only save me pennies.
Thanks guys!
I have been reading like a fiend trying to put together a list of things to take to my tech, but I'd like to get your take on what would work best. Keep in mind I want to keep it simple - no S1, 5-way, push pull rocket launchers etc. I'm looking for a simple 3-way using this control switch, that volume and tone pot, this brand capacitor rated at.....cloth wire... . Also, not to contradict myself, the best wiring scheme for a neck bucker/bridge single coil. I have read a lot about tone only to the bridge and that seems to make sense.
I know that these parts are in general pretty cheap, so go ahead a list the best of each. Not looking to save a few pennies, because going cheap here probably would only save me pennies.
Thanks guys!
![$vboptions[bbtitle]](../../gifs/tdpr-headTRANS.gif)