claudel
February 23rd, 2012, 10:10 AM
Hi
I need a reality check here. Not looking to sell, looking for what they call "insurance valuation" on the Roadshow.
http://www.sonic.net/~claudel/froggy-tele05.jpg
http://www.sonic.net/~claudel/froggy-tele06.jpg
Originally was a black '72 Fender
http://www.sonic.net/~claudel/froggy-tele08.jpg
Parsons-White Pull String #0011 installed in April, 1975. I've never seen a lower number...
http://www.sonic.net/~claudel/froggy-tele07.jpg
Bridge pickup - Don Mare Custom Alnico 5 6K
Neck Pickup TV Jones MagnaTron
4 way switch
RS Superpot/Fender No-Load Tone Pot/RS tone cap
Rare parts:
Genuine Vintique non-magnetic bridge
Taipan Tone Bar
New Glendale Wide Intone Brass Cutting Edge saddles with Steel B/E
USACG Neck
USV-1 neck, 1 piece flame maple, 25-1/2" x 22 frets
Heel adjust, 1-11/16" Earvana OEM slot
7-1/4' - 9-1/2" radius, Fat Back, 6105 frets,
Kluson + low E M6 tuner holes
Headstock split along the flame between the tuners and has been solidly repaired ( See pic )
Gotoh Kluson replicas with Hipshot/Schaller Drop-E tuner
#10 Stainless machine screws and inserts for neck mounting.
Callaham Neck Plate and string button.
http://www.sonic.net/~claudel/froggy-tele09.jpg
Fresh setup for GHS Burnished Nickel strings .050 <> .011 by famous guitar mechanic including Plek job.
Thanks in advance for any insights...
I need a reality check here. Not looking to sell, looking for what they call "insurance valuation" on the Roadshow.
http://www.sonic.net/~claudel/froggy-tele05.jpg
http://www.sonic.net/~claudel/froggy-tele06.jpg
Originally was a black '72 Fender
http://www.sonic.net/~claudel/froggy-tele08.jpg
Parsons-White Pull String #0011 installed in April, 1975. I've never seen a lower number...
http://www.sonic.net/~claudel/froggy-tele07.jpg
Bridge pickup - Don Mare Custom Alnico 5 6K
Neck Pickup TV Jones MagnaTron
4 way switch
RS Superpot/Fender No-Load Tone Pot/RS tone cap
Rare parts:
Genuine Vintique non-magnetic bridge
Taipan Tone Bar
New Glendale Wide Intone Brass Cutting Edge saddles with Steel B/E
USACG Neck
USV-1 neck, 1 piece flame maple, 25-1/2" x 22 frets
Heel adjust, 1-11/16" Earvana OEM slot
7-1/4' - 9-1/2" radius, Fat Back, 6105 frets,
Kluson + low E M6 tuner holes
Headstock split along the flame between the tuners and has been solidly repaired ( See pic )
Gotoh Kluson replicas with Hipshot/Schaller Drop-E tuner
#10 Stainless machine screws and inserts for neck mounting.
Callaham Neck Plate and string button.
http://www.sonic.net/~claudel/froggy-tele09.jpg
Fresh setup for GHS Burnished Nickel strings .050 <> .011 by famous guitar mechanic including Plek job.
Thanks in advance for any insights...
![$vboptions[bbtitle]](../../gifs/tdpr-headTRANS.gif)