Lets see those worship boards

I'm curious to see what you guys are using for worship in the pedal department. Amp top pedals are welcome to this thread aswell. I'm currently working on my board. I still need an MXR CC and a Voodoo Lab Micro Vibe. I also plan on replacing my Dunlop DC brick with a Voodoo Lab Pedal Power 2+. Here is what I'm running now in order.

Guitar_ Dunlop GCB95_ Boss TU-3_ Boss DF-2 MIJ_ Keeley Modded Boss SD-1_ Boss CE-2 MIJ_ Amp

The crybaby, tu-3, and sd-1 are powered by a Dunlop DC brick. The df-2, and ce-2 are powered by a 9v battery. The MIJ ACA boss pedals run at 12v with the adapter. It converts to 9v inside the pedal. If you use a 9v battery on the battery clip, it is already 9v. That is why I need a new pedal power. The Dunlop doesn't put out 12v_ only 9v, or 18v.

I think (hope) I'm done my board. Just bought the final two pedals this week and they should be here any day now. Hoping to trade my chorus for a phaser this weekend and that should be it. As of now it runs:
Guitar>TU3>Clyde Deluxe>Ego Comp>Paisley OD>Amp
The effects loop is:
Wampler Nirvana>Vox Time Machine Delay>EHX Holy Grail.

Next week the effects loop will look like this if all goes well:
Phaser (either EVH Phase 90 or Pigtronix)>Empress Superdelay>Empress Tremolo>Holy Grail.

I also bought an original EHX POG this week and once it arrives, I'll figure out where it the chain it belongs.

Pics to come next week.

Already a couple threads for this here, but I'll go again, thanks to the wondrous magic of cut-copy-paste!

**************************************************

Pedaltrain 2, chain is:
-Fender Telecaster FMT HH (amazing guitar, if I needed another I would get the same thing.)
-Fulldrive 2 FM/CompCut (in CompCut mode. I leave it always on, and hit the boost for overdriven tones.)
-Radial Tonebone Hot British Distortion (Marshall in a box. This thing is legit.)
-Ernie Ball VPJR w/ Tuner out to TC Polytune (amazing tuner, gonna get the EB active modded.)
-Strymon Timeline (AAAAAAAHHHHHHHHH!!!!!!!!!! RIDICULOUSLY AMAZING!!!!!!!!!!!)
-Fender Blues Junior (Crazy good amp, but I smell a Morgan in my future.)
- Miked with an e906 (got this cool high contour switch.)

All wired up with George L's and powered by a Cioks DC10 (do any Danish people out there know how to pronounce it? I believe it's "chucks"???). Planning on filling the open space with a Disaster Area DMC-6 for the Timeline. Also working with JHS to replace the full drive with an EP/808 2-in-1.

Boss DD7 and a ts9dx through a vox ac15 tele all I ever really use.

Subject to change, but currently:

Guitar -> tuner -> Boss OD3 -> amp

Loop: Boss DD20 delay -> Danelectro Cool Cat tremolo

Pretty simple really but I also have a Boss CE5 chorus that I usually use with my acoustic guitar and have recently acquired a Crybaby wah and Morley volume pedal which I need (okay, want!) to incorporate into my set-up. I need to get a pedalboard though as I'm currently setting everything up from scratch each week so only pull out the pedals I know I'm going to use for that week's setlist, e.g. this week, when I'm leading worship so am singing as well, I'll keep it simple and just set up the tuner and OD3.

Boss tu3-danelectro daddy o-usa muff pi- rouge delay- mrx evh flanger- USA small clone- rouge tremelo- to a 75 watt line 6. At home I have a traynor ycv blue 50 watt.

114867

MIM Tele (sometimes Epi Swingster)....pedal train 1 with Tu-2, sd-1, cry baby wah, Fulltone fat boost, tube screamer, mxr phaser, vp volume pedal, visual sound H2O (analog echo, chorus combo), Dd-7, Vox AC -15 or Blues JR NOS.

Currently:

http://t1.gstatic.com/images?q=tbn:ANd9GcRwESSACokYraCeUxPZhNsCW9Upetuor 6P31hOMTvB1EIUMd46Q

Soon to be:

http://t2.gstatic.com/images?q=tbn:ANd9GcR2oMcm5ZizLt5_oQScowlz0wXnwDz7c pHEet2zNLZkJYP8wI6SJQ

http://www.tdpri.com/telephoto/data/539/medium/pedals11.jpg

My new board is waiting for me at home, along with a new EQ pedal. Once I've set it up (with the Boss OC-3 that's in transit at the moment) I'll post a pic. :grin:

This board...
http://i.imgur.com/wL5uT.jpg

With this guitar...
http://i.imgur.com/1p5es.jpg

Hey all, new to this forum and figure this is the right place to start! My chain looks like this: guitar > korg pitchblack > Morley volume > morley bad horsie 2 > boss sd-1 > VS open road > wampler hotwired > mxr micro amp > dd20
with an EHX memory boy and occasionally a boss ce-5 in the loop

118735

http://www.sweetwater.com/images/items/350/ChampPedal.jpg

(With a Super Champ XD.)

I'll occasionally add my whippled crybaby, and I'm toying with the idea of making an echo (since we can't use delays in worship anymore), but here it is for now. I built all but the tuner. Ts808 clone, an 80's rat clone and a boss ce2 clone.



118846

It's not stuck down yet but here's my board (subject to some messing with power supplies to get the least noise).

'97 Korean Squier Telecaster -> Sabine NexFX Tuner -> Artec SE-EQ8 8-band Graphic EQ -> Boss OD3 Overdrive -> Dunlop Crybaby Wah -> Amp (Fender Hot Rod Deluxe at present)

FX Loop:
Boss OC3 Super Octave -> Boss CE5 Chorus Ensemble -> Danelectro Cool Cat Tremolo -> Boss DD20 Giga Delay (with footswitch for tap tempo)

I think (hope) I'm done my board. Just bought the final two pedals this week and they should be here any day now. Hoping to trade my chorus for a phaser this weekend and that should be it. As of now it runs:
Guitar>TU3>Clyde Deluxe>Ego Comp>Paisley OD>Amp
The effects loop is:
Wampler Nirvana>Vox Time Machine Delay>EHX Holy Grail.

Next week the effects loop will look like this if all goes well:
Phaser (either EVH Phase 90 or Pigtronix)>Empress Superdelay>Empress Tremolo>Holy Grail.

I also bought an original EHX POG this week and once it arrives, I'll figure out where it the chain it belongs.

Pics to come next week.

Here it is:
http://i251.photobucket.com/albums/gg306/mrjordan55/IMG_1833.jpg

Lots of modulation, but only one OD? Hats off!

Yeah, you must be REALLY happy with that Paisley Drive!

(since we can't use delays in worship anymore),

id die without my delay!

i use a BOSS GT-10. literally covers every base.

That was actually a joke..... There is a thread whose title starts with revelation 10:6.... Look for it and follow the link in the first post....

Here is mine for the time being...a DD-6 also flip flops with the Carbon Copy and a Box of Rock changes out with the OCD. The BOR goes with my Marshall since it farts out my Fender Special Design speaker in my '93 DRRI.

The Verbzilla is there for the Marshall or Champ.

119340

Sent from my DROIDX using TDPRI

http://i1187.photobucket.com/albums/z384/CarlGuitarl/GznBz011.jpg

Its an ever evolving board... ( or should I say revolving???) the Rat gets swapped out some, the fab echo gets bumped some... but I'm super happy with the Digitech Rp300a, Lets me have settings for the acoustic twelve string, the tele nine string or any of the other dozen guitars I may pull out that week... and still use just one board. Morley splitter takes it direct to the PA and out to my little Bugera 5 watt.

Hey all, new to this forum and figure this is the right place to start! My chain looks like this: guitar > korg pitchblack > Morley volume > morley bad horsie 2 > boss sd-1 > VS open road > wampler hotwired > mxr micro amp > dd20
with an EHX memory boy and occasionally a boss ce-5 in the loop

118735

Welcome to TDPRI. And thanks for the reply. A big thanks to all the other replies aswell.

just upgraded mine

http://img.photobucket.com/albums/v206/jazzrat/pedalboard-1.jpg

just upgraded mine

http://img.photobucket.com/albums/v206/jazzrat/pedalboard-1.jpg

If I could replace my board with any that I've seen....this would be IT!!
:shock:

Lots of modulation, but only one OD? Hats off!

I hardly even use the Paisley anymore. I used it a fair bit with my Tiny Terror, but not much since I sold that. My main amp (Marshall AFD100) doesn't have a clean channel (but has two fantastic "modes" - AFD and #34), and my Traynor has such a great gain/boost channel that unfortunately the Paisley doesn't see much use.

those are all great setups

If I could replace my board with any that I've seen....this would be IT!!

lol...Thanks. It has taken me quite a while to get to this point. Nothing wrong with the Hillsong/U2 tone model but I was going for more of an Eric Johnson/Brewster/Bonamassa vibe. Used it in this configuration for the first time Sunday...Very pleased but I changed so much in such a short time that I am having to do some serious re-dialing in of my tone. It will be fun the next couple weeks tweaking the settings.

lol...Thanks. It has taken me quite a while to get to this point. Nothing wrong with the Hillsong/U2 tone model but I was going for more of an Eric Johnson/Brewster/Bonamassa vibe. Used it in this configuration for the first time Sunday...Very pleased but I changed so much in such a short time that I am having to do some serious re-dialing in of my tone. It will be fun the next couple weeks tweaking the settings.

I know what you mean. I've been meaning to tweak my tone this week since I took my Marshall GV-2 out of my pedalboard, but I left my amp at church last sunday. I'll have to get it right at rehearsal tonight lol...

lol...Thanks. It has taken me quite a while to get to this point. Nothing wrong with the Hillsong/U2 tone model but I was going for more of an Eric Johnson/Brewster/Bonamassa vibe. Used it in this configuration for the first time Sunday...Very pleased but I changed so much in such a short time that I am having to do some serious re-dialing in of my tone. It will be fun the next couple weeks tweaking the settings.

That is really cool having all that stuff. I would get completely lost. I never heard of Bonamassa until this year and I saw him on public TV. He got tones and did stuff with effects which was very unique. He can have attacks like a violin and also like all the horns and somehow he keeps it all in order. So I go to youtube and I find this:

http://www.youtube.com/watch?v=_5GMTfY6yoc

Four different amps with a whole bunch of effects (and put to full use instead of minor coloring of a tone). This reminds me of the Edge but more high tech. I wouldn't know how a guitarist keeps things on cue while also trying to worry about the music side of things. I know Clapton had a large rack in the 1980s/1990s and worked it out somehow.

My effects chain works like this... guitar - Boss Blues Driver - Boss SD-1 Overdrive - Boss DS-1 distortion - Boss super Chorus - MXR Mirco Amp - Delta Lab Delay - Boss 7 Band EQ - amp. With a DC Brick for power. This combination works well for me and gets all the sounds I need for my church worship music.

My effects chain works like this... guitar - Boss Blues Driver - Boss SD-1 Overdrive - Boss DS-1 distortion - Boss super Chorus - MXR Mirco Amp - Delta Lab Delay - Boss 7 Band EQ - amp. With a DC Brick for power. This combination works well for me and gets all the sounds I need for my church worship music.

Did you see the C6-clip mod for the SD-1 in the Stomp Box forum?

http://www.tdpri.com/forum/stomp-box/318147-faulty-sd-1-just-not-me.html#post4020245

119925



119926

Still not done! Ran outa Velcro lol and two more pedals on the way. Inexpensive do it yourself board. I guess whatever works.

ThighBanez,

Yes, I saw the SD-1 mod and am doing that this evening after work. Thanks for the reminder.

ThighBanez,

Yes, I saw the SD-1 mod and am doing that this evening after work. Thanks for the reminder.

Awesome! :grin:

Here's what i use. It's not completely finished.:grin:

Update....the Boss DD3 is coming off. I have a TC FlashBack incoming.
The Boss is going to market so I can add distortion or fuzz in front of my OD's.
Then I'm done...I think

Here's mine updated with the addition of the EJ Fuzz Face...

http://i235.photobucket.com/albums/ee46/tomandlainey/100_9265pb.jpg

I updated my board. I have an MXR Carbon Copy at the end of my chain. I now realize how "empty" my sound was without delay. It's probably going to be my number one pedal from now on.

Final, final update....
Boss dd-3 is off...flashback is on...Awesome pedal.
Incoming Fulltone 70bc fuzz.
Stab me with a fork....I'm done!

Final, final update....
Boss dd-3 is off...flashback is on...Awesome pedal.
Incoming Fulltone 70bc fuzz.
Stab me with a fork....I'm done!

The Flashback is the most awesome delay for it's size.
Have you picked and uploaded a toneprint to it yet?
I use an Ambient toneprint that they made for a bass guitar but it works sooooo good for regular guitar when you want more spacey-ness.

yup...love the Toneprint feature. I got the free Ipod Touch ap too. You can beam TonePrint settings through the pickup of your guitar to the pedal. AMAZING and way more convenient than hooking up via usb.

yup...love the Toneprint feature. I got the free Ipod Touch ap too. You can beam TonePrint settings through the pickup of your guitar to the pedal. AMAZING and way more convenient than hooking up via usb.

Wait...that app works for ipod touch too!?
I thought it was only iPhone!!?

YAY! If this is true I don't have to upgrade my phone!!

you have to have the latest firmware but it works terrific!
It installs ALL of the tone prints on the phone/Touch so I can change in literally 10 seconds. Much faster than USB.
You select the TP you want....hold the Touch close to whatever pickup you have selected.
Toneprint has to be selected and the pedal on. The speaker on the Touch makes a digital sounding squeeky sqwauk noise...the l.e.d on the pedal flashes and you are done.
amazing

Here's my updated board. I moved some stuff around, and I added the CC. I also posted a pic of the "new" Tele. It's a 89 American Standard. It's not all original, but it isn't exactly vintage anyway. For the fun of it, I also posted a pic of the family. I think the new Tele will fit in just fine.

I don't have much for effects. Tuner > OD > Boost > Delay. I get my Tremolo and Reverb from my Vox AC15C1. I also use an ABY box to switch between my AC15 and my Marshall Haze 15. I don't use any effects for my Marshall, only the drive channel on the head. I mic my amps unless I'm playing in a small setting.

http://www.tdpri.com/telephoto/data/1198/medium/SDC11461.JPG

Mly board is getting an Easter makeover today. Unfortunately, I'm out of space and the Crybaby got bumped.

Pix later.

Here's my current board.

http://img444.imageshack.us/img444/2183/img3637s.jpg (http://imageshack.us/photo/my-images/444/img3637s.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

Moved everything around again. I added the Boss DD-3 and the CS-9 is on the board while my CE-2 is getting fixed and modded. I put a power strip under the board so the DD-3 can run on its own adapter. The DC brick can't handle the MA requirements for it. I think I need to invest in a Pedaltrain and a Voodoo lab Pedal Power. This board is getting heavy and I can't fit the one other pedal I plan to buy. I'm liking this setup though, it's very nice having two delays.

here's mine ... i probably just need either a vibe or phaser :)

http://odnalor.org/wp/wp-content/uploads/2008/04/pedalboard-may2012.jpg

^ What is that purple pedal on the bottom left of your board?

^ What is that purple pedal on the bottom left of your board?

That's a custom MaxxPlay (http://www.maxxplay.us/models/n-models2.html) patch box that I asked Anthony to build. It can switch pedals from the amps loop or in-front. I had 2 amps before, one has a loop and the other doesn't.

Right now, it's not hooked up for that, just straight board to amp connection.

That's a custom MaxxPlay (http://www.maxxplay.us/models/n-models2.html) patch box that I asked Anthony to build. It can switch pedals from the amps loop or in-front. I had 2 amps before, one has a loop and the other doesn't.

Right now, it's not hooked up for that, just straight board to amp connection.

Very cool!!!

http://sphotos.xx.fbcdn.net/hphotos-prn1/534319_10150612689371707_627711706_9347998_2001719 508_n.jpg

Well, it has been a trial and error process, but I think I have settled on my pedal lineup. I'm using an SKB powered board and it goes:

Guitar>Dunlop CryBaby>Moen UniComp>MHP 72°>Dano Cool Cat Tremolo> Dano Cool Cat Vibe> Ernie Ball VPjr volume pedal>HardWire DL-8 Delay (for tapping direct rhythm)>Line 6 Echo Park (for tapping quarter notes and getting dotted eighth repeats)> Blues Junior NOS Tweed w/ Eminence Red White and Blues speaker instead of the Jensen, miked to board. I have a Korg Pitchblack coming off the tuner out of the volume pedal.

I have the bare minimum I can get away with while still being able to get in the ballpark of the style we're doing. For me, I have one overdrive and one delay. It's amazing what can be done with those, plus a tele and Princeton Reverb.

I guess I have a tuner too but I don't necessarily count that as an 'effect' pedal. Just a convenience.

-jm

Well, it has been a trial and error process, but I think I have settled on my pedal lineup. I'm using an SKB powered board and it goes:

Guitar>Dunlop CryBaby>Moen UniComp>MHP 72°>Dano Cool Cat Tremolo> Dano Cool Cat Vibe> Ernie Ball VPjr volume pedal>HardWire DL-8 Delay (for tapping direct rhythm)>Line 6 Echo Park (for tapping quarter notes and getting dotted eighth repeats)> Blues Junior NOS Tweed w/ Eminence Red White and Blues speaker instead of the Jensen, miked to board. I have a Korg Pitchblack coming off the tuner out of the volume pedal.

Played this rig for a service for the first time today. I can't say enough about the 72°. Just the right amount of drive for my taste.

Heres what I'm hitting up at the moment. It covers all my basic needs. I like squeeze different sounds from my guitar controls and pickup selection rather than a larger selection of drives. The blue boy original is set up for transparent drive and the blues pro is strait up tube screamer.

http://i168.photobucket.com/albums/u165/hectikaf/fr_218_size640.jpg

132113 Heres mine.
That is, TU-3>OCD>DD-7 (with tap tempo)>EB Volume>MXR CC. Powered with a PP2+. I love my board. Everything else i could get would just be extra. this board can do absolutely everything i need.

running with a Mexi Tele and a Vox ac15

Finally got round to setting up my tube-buffered stereo board, with optional direct-to-desk.

SIB Fatdrive -> Durham Sex Drive (underneath) -> EB Jr (tuner out to Polytune) -> Fish Factory -> Red Snapper -> TIM -> Stereo Univibe -> DD20 -> Cathedral -> pair of Palmer PDI-09 (through jack's used to send L-R signal straight to the stereo power amp return if my Trace Elliot Velocette. Eminence Reignmaker 2x12 (built-in attenuator).

That *should* be me sorted for a while.

132720



132721



132722

[QUOTE=tjalla;4264756]Finally got round to setting up my tube-buffered stereo board, with optional direct-to-desk.

SIB Fatdrive -> Durham Sex Drive (underneath) -> EB Jr (tuner out to Polytune) -> Fish Factory -> Red Snapper -> TIM -> Stereo Univibe -> DD20 -> Cathedral -> pair of Palmer PDI-09 (through jack's used to send L-R signal straight to the stereo power amp return if my Trace Elliot Velocette. Eminence Reignmaker 2x12 (built-in attenuator).

That *should* be me sorted for a while.

That's a fancy setup right there. Very nice gear on that board.

Here's my board for now. Yet another pedal has broke. I love the sound of those old MIJ Boss pedals, but the components do go bad. I need to get another OD pedal soon, it's hard only using one. Here's my board as of now-

Boss TU-3, Dunlop GCB-95, Keeley SD-1, Boss DD-3, MXR Carbon Copy

The footswitch is for my Fender 6G13 reverb unit clone. I only use the reverb with my 66 Fender Bassman. For church I'm using a 66 Fender Super Reverb.

My Boss board gets to work this weekend at our annual 4th of July Freedom Celebration.

OD-3 Overdrive (modded), HM-2 Heavy Metal (modded), CE-5 Chorus, TU-3 Tuner, Dunlop High Gain volume pedal, DD-7 Delay. It's all juiced from an Arion 9V, 1.2 amp regulated power supply.

Oh, and an easy button.

http://i281.photobucket.com/albums/kk239/avmusician/Guitars/Pedalboard070112005c.jpg

Just finished reorganizing mine and making room for the newest addition... my Morley Distortion Wah Volume.

Polytune-Fulltone FatBoost-Germanium Fuzz-Morley-Fulltone OCD-EHX Stereo Pulsar-mXR micro chorus-Modtone Analog Delay

133397

Here is my board.

Hardwire Polytune
Hush NoiseGate
MXR DynaComp
Fulltone OCD
BOSS Chorus
TC Electronics Nova Delay
Verbzilla
Hardwire RV-7 Reverb

The board is handmade.

Updated the board today to make room for the "new" DD-5 I just got. Right now it's just set for volume swells with the Ernie ball pedal, not sure if that's what will stay but it's pretty clear that the flashback will stay to "dotted eighth" pedal.

Wanting an 8 bit crusher because im a huge Radiohead fan and a Volume pedal, but its been a lot of money saved up for what i have so far!

-BBE opto stomp--TC tuner-- Cry Baby-- Fairfield Barbershop OD-- SBN Screamin eagle OD-- TS9 -- JOYO Delay-- Strymon Blue Sky-- DOD fx9 delay-- DL4-- Guyatone micro chorus-- EHX HolyGrail reverb-

Mine's not really a "pedalboard" but a footswitch hooked to my modeling amp.

Mostly I just step on the button labeled "U2.":mrgreen:

http://i1080.photobucket.com/albums/j323/christhee68/DSCN4001.jpg

Here's a shot of my current rig (guitar excluded). Possibly going to rack the whole thing and control it via GCX.

Well, it has been a trial and error process, but I think I have settled on my pedal lineup. I'm using an SKB powered board and it goes:

Guitar>Dunlop CryBaby>Moen UniComp>MHP 72°>Dano Cool Cat Tremolo> Dano FAB Chorus> Ernie Ball VPjr volume pedal>HardWire DL-8 Delay (for tapping direct rhythm)>Line 6 Echo Park (for tapping quarter notes and getting dotted eighth repeats)> Blues Junior NOS Tweed w/ Eminence Red White and Blues speaker instead of the Jensen, miked to board. I have a Korg Pitchblack coming off the tuner out of the volume pedal.

http://www.tdpri.com/forum/attachments/worship-service-players/130882d1339635935t-lets-see-those-worship-boards-s3000001-jpg

Exchange a FAB chorus for the Dano Cool Cat Vibe on the left end. I think this is it. Watch this space for further developments.:lol:

Hi there! Im new to the forum! :)

I just wanted to show you guys what im using right now.

Im using a Gt8 and a Marshal DSL401, using the GT8 with the 4CM, and using my amp's Prepamp, and the GT8 FXs (i don't use the GT8 Amps much, just for selected tunes), and i like the sound im getting out of it.

I bought the GT8 recently, about 1 month ago, so im still learning how to use it, but what i've done so far, i really like it.

PS: Those aren't actual pics.

Tjalla - just checking your board out and just noticed that our Tim's have the exact same settings. Is your toggle switch in the middle?

Tjalla - just checking your board out and just noticed that our Tim's have the exact same settings. Is your toggle switch in the middle?

GregWV - actually those settings prob got bumped around a bit. I cut the eq more that that - bass around noon-1, treble around 1-2 depending on the guitar. That is however with the Durham sex drive on, and tone most of the way up - I like to drive the signal with top end content early, and dial it back accordingly - hence the Tim/Menatones all having treble roll-off. Switch is most def in the middle however:-)

Here's my new board, and a new pedal. I added a Matsumin Valvecaster. The new order is-

Boss TU-3, Dunlop GCB-95, Keeley SD-1, Matsumin Valvecaster, Boss DD-3, MXR Carbon Copy

Here's mine updated with the addition of the EJ Fuzz Face...

http://i235.photobucket.com/albums/ee46/tomandlainey/100_9265pb.jpg

Now that's a board! A surf board :lol:.

These are all nice pedal boards. :cool:

Another update to my board. The pot in my wah broke, so I need to fix that. I'm also going to true bypass mod it. I ordered the parts for it, so I should get those sometime soon. My old Boss CE-2 that has been broken for the past six months is with Keeley right now being repaired and modded. I should get that back sometime next week. I'm so glad I can put that back on my board.

There's one new addition. I just finished building a Tonebender clone a couple days ago, so now I have a nice fuzz on the board. I also managed to get my power supplies under the board, and I even have them wired to a main power switch on top of the board. (That's what that little green switch is to the right.) Anyway, here's the order for now-

Boss TU-3, Tonebender clone, Keeley SD-1, Matsumin Valvecaster, Boss DD-3, MXR Carbon Copy

By late next week I should have my CE-2 and the wah back on there. I'm still thinking about replacing the DD-3, but for now it's fine.

I'm in the middle of a do over on my board. I'm going with a lattice design that will be very similar to jonhart's. I almost never use my wah, so it's coming off the board, but it will still be in the bag so I can bring it out if needed. It will be tu3 > rat clone > ts808 clone > small clone chorus clone > ibanez ddl delay > amp. Most of the wood is cut. I hope to finish the construction and paint tonight. Pics to follow....

Sent from my iPhone using TDPRI

I'll wire it up tomorrow, but here it is..... Nothing special here, but I get a good sound....



146137

Sent from my iPhone using TDPRI

Latest update with Strymon Flint. Lehle looper switches multiple pedals AND pickups simultaneously - just to be difficult/different :razz:

I think I have to do something with my pedal board. It is way too heavy. I had to buy a moving dolly to get my stuff in and out of my home and church. I might go with a small home-made board and power it with my One Spot. This thing is stupid heavy. BTW, the latest iteration of my board replaces the FAB chorus with a DOD FX64 chorus. I think I'm done adding effects. Now I have to subtract some maybe and get a lighter board.

I think I'm done adding effects. Now I have to subtract some maybe and get a lighter board.

I hear you. I wanted something that I could just throw in a backpack and go. My last update may be to replace the ibanez delay with a boss dd sometime soon..

Sent from my iPhone using TDPRI

I had to buy a moving dolly to get my stuff in and out of my home and church.

A good benchmark test right there!

Yeah, and we're only talkin' the SKB board with eight pedals and a tuner, a Blues Junior a guitar and a small cable/paraphernalia bag. That board weighs forty pounds.

Yeah, and we're only talkin' the SKB board with eight pedals and a tuner, a Blues Junior a guitar and a small cable/paraphernalia bag. That board weighs forty pounds.

You could easily fit those pedals on a Pedaltrain 2 (maybe even a PT 1), mount a power supply underneath, and cut the weight way down. Heck, I've got 7 pedals, a PRO DI, and a VL ISO 5 on a PT Jr for my acoustic, and it all fits great.

Here is mine.

My PT1 is overflowing - see posts a few back, but it holds:

Lehle D.Loop
EB Jr Vol
DD20
Analogman KOT V2 (bigbox)
Strymon Flint
Green Rhino
Dano Fish & Chips
Dunlop Univibe
EP Booster
Menatone Red Snapper
DD7
TU-2
...and T-Rex Fuel Tank topside. I could mount it underneath and save more room but I'm lazy to drill and I reckon it looks cool.

That being said - I have lost sleep over getting this board just so.

My board is done.., for now anyway. I got my CE-2 back from Keeley, it's absolutely AMAZING ! I'm glad I went through with the mod. I also fixed my wah. While putting a new pot in it, I modded it to true bypass, added a yellow LED, and a yellow fasel inductor. I like it, but it has a little too much bass for my tastes. I'm still tweaking it though. It has a pretty bad hum too, but like I said I'm still messing with it. I'm just glad I have a wah again. Here's the new order-

Boss TU-3, Dunlop GCB-95, Tonebender clone, Keeley SD-1, Matsumin Valvecaster, Keeley CE-2, Boss DD-3, MXR Carbon Copy

Just finished reorganizing mine and making room for the newest addition... my Morley Distortion Wah Volume.

Polytune-Fulltone FatBoost-Germanium Fuzz-Morley-Fulltone OCD-EHX Stereo Pulsar-mXR micro chorus-Modtone Analog Delay

Argh! Been dreaming about the possibility of adding a Whammy V to the board. Not sure how I'll fit it.

Here is mine.

http://i1069.photobucket.com/albums/u461/geetarplayer/Gear/board.jpg

Here is mine.



Hey! That's the same Home Depot welcome mat that I've used on some of my boards!

Sent from my iPhone using TDPRI

Hey! That's the same Home Depot welcome mat that I've used on some of my boards!

Sent from my iPhone using TDPRI

Yep. And with Liquid Nails as an adhesive... nothin's falling off of that board.

Here's mine. The board is just a poplar 1x8 I planed down to 1/2" thick and rattle canned for black. Add a Velcro strip and four little rubber feet and there you go.

Had an extra spot (waiting for someone to give me a reverb pedal ;-)) so I put the GE7 on there. Helps fatten things up since I have to keep my amp pretty quiet. Amp is usually a 5f4 clone but sometimes a pathfinder 15 if I want to lighten the load.

I would love to upgrade the delay and maybe get a Flint to give me reverb and replace the tr2. Ain't happening any time soon though.

All in all I'm pretty happy with it -- this is my worship/blues/rock/country/whatever else I play board.

My CIOKS DC 8 finally arrived today and it all fits. I bought some Stage Trix pedal risers which are really handy for routing and for storing excess cable. The only thing is I find them a bit too space consuming out of the box so I hacksawed off all the end tabs and filed them smooth.
http://i908.photobucket.com/albums/ac284/nrand_photos/Amps%20Pedals%20and%20PA/121016pedalboard_16.jpg
http://i908.photobucket.com/albums/ac284/nrand_photos/Amps%20Pedals%20and%20PA/121016pedalboard_41.jpg

For my acoustics I run - Tuner - A/B - Volume - Redeye - JC120 with 1 side of my FX processor.
For my electrics, from the volume pedal, I run Blackstone > Fuzz [not used in worship but I also play elsewhere] > Rodenberg GAS 828 > Tremolo > BigShot ABY > JC120 [channel one with Vibrato and the other half of my FX unit in the loop for delays etc] & Laney VC30 212 - the two amps in stereo.

132113 Heres mine.
That is, TU-3>OCD>DD-7 (with tap tempo)>EB Volume>MXR CC. Powered with a PP2+. I love my board. Everything else i could get would just be extra. this board can do absolutely everything i need.

running with a Mexi Tele and a Vox ac15

Do you only need one OD pedal?

Latest setup. Pretty happy with this one, but I'll never say it's done...

http://img600.imageshack.us/img600/6127/photocfa.jpg (http://imageshack.us/photo/my-images/600/photocfa.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

My board...

http://sheasbyphoto.com/Pedalboard/Pedalboard-1.jpg

Final update. (Yeah, right!)

Fender Mustang Floor.

I made a patch of:

Amp: '65 Twin
Stomp: Overdrive
Mod: Wah
Delay: Tape delay
Reverb: '65 Spring

Through the Blues Junior I turn the bass and treble all the way down, the mids all the way up, no reverb, fat switch up, and no preamp breakup. Sounds divine!:wink::lol: My Bandit, which I have been using, is at the church and I have been off since the 4th of November, so I guess I'll see how I like my sound through it.

I'm going to see if I need my Echo Park or if I can count in the dotted eighth taps. I can get them without the pedal converting them but it's easier with the dotted setting. I am getting a decent amp compressed sound from the unit, so I'll see if I need to add the compressor. I think this is it. I love the sound of my board but it's too heavy. I can't stand hauling it in and out of the church to play.

That is, TU-3, Crybaby, OCD, Barber LTD, EB Volume, DD-7 (w/ tap tempo), Carbon Copy, Xotic EP Boost.

My board... reloaded! Got a Flashback X4 this week to replace my Modtone Analog Delay.

this is my latest updated pedalboard. This set up works really well in worship.

CAE crybaby - Maxon OD9 - Fulldrive 2 mosfet - Blackstar HTdist - Boss Ch1 - Boss DD5

Well, I am pretty satisfied with the sound, control, and use of this setup... so I suppose I can post it now...

http://i1341.photobucket.com/albums/o754/telebeeb/Snazzy%20pics/pedalboardupload1_zpsd22be51a.jpg

The Essentials...

The Essentials...

Fender Tele->Polytune->Boss CS-3->EB volume->OCD->TS9->Boss CE-5->Boss DD-20+T1M Tap Tempo->Hall of Fame Reverb->Fat Boost 3-> Vox Night Train

Planet Waves Cables and BBE Supa Charger

The Essentials...

I don't know how you hit the upside down pedals without moving knobs

I don't know how you hit the upside down pedals without moving knobs

I believe it actually makes it easier to not hit the knobs with them being on the top. I don't have to squeeze my foot in between two sets of knobs. Try it out sometime, you'll be pleasantly surprised. If I was playing on a flat board I can see how it might be a problem.

My board isn't flat so ill have to try it :)

Here is my board.

162452

Don't have any pics of my own, but at the moments it's as follows:

http://www.backalleymusic.co.uk/contents/media/ibanez%20ts9.jpg

http://turkrock.com/attachments/5176/

Line 6 hd500 here.

This is as good as it gets for me updated for the new year...

I'm new to playing guitar in worship. I'm first/foremost the bass player, but am starting to lead worship and I want to play guitar when I do. My set-up is simple at the moment. The past couple times that I've led, I plugged into an MXR od and Boss Blues Driver staright into the PA. Not a bad sound, but the PA made it sound fuzzy. Last week, I finally picked up my Bugera V5, which I mic'd, and played my SX Tele through a Boss Blues Driver. Loved the sound on stage and I'm looking forward in seeing/hearing the weekly dvd to see if the sound was better through the house and board. I'll add more pedals when I'm just playing and not having to lead the band, but in the meantime, I'm quite pleased with my set up.

btw, love seeing all the pedalboards on this thread. gives me pedal envy!!

downsized quite a bit and it feels great :grin:

but I am waiting for a "Prince of Tone" to partner with the Gain Changer :oops:

downsized quite a bit and it feels great :grin:

but I am waiting for a "Prince of Tone" to partner with the Gain Changer :oops:

Looks good!

Looks good!

thanks ... sounds great, too. not a lot of tap-dancing this morning. just stepped on the GC and played music ;)

This is what I have so far:
http://i1354.photobucket.com/albums/q694/Todd_Clark/pedalboardjan13_zpse8de606a.jpg
TU-3,GFS Dual OD, GFS Brownie, EH DoctorQ, Dano Flange, Dano Chorus, MXR Carbon Copy, and Behringer noise filter. I plan on adding a volume pedal soon. May phase out the chorus and flanger. Hardly ever use them.

http://www.sweetwater.com/images/items/350/ChampPedal.jpg

(With a Super Champ XD.)

LOL love it!
Mine is Tube amp channel switch Digital Verb Delay Chorus and Wah.
2 of my amps are single channel high gain rigs with NO CLEANS and NO REVERB!
I NEVER use a dirt box run my amps pretty dirty and use my pickup selector and roll back my volume to clean up.
Good to see you here Brian BTW!

So close to perfect. But of course, not there yet.

Either a Les Paul Custom or Les Paul Junior into:

Boss TU-2 > Custom FF Wah > Custom FF Boost > Fulltone FD2 > Custom FF OCD Clone > Goodrich L10K > Line 6 DL4 w/ expression pedal > Boss DD-5 > DeltaLabs DD-1 > EHX Nano Grail > Boss RV-5 stereo out

Depending on where I play: Vox AC15C1, Vox AC30HW, Orange AD30 I run the stereo into both channels on the Vox amps.

As far as delays, the DD-5 is for dotted eighths, the DL4 is for quarter notes, dotted quarters, and analog using the expression to add in modulation or control repeats and mix, the DD-1 is just for slapback.

The AB/Y box was being used to switch the signal from the amp to a DI to use an acoustic as well.

164136

This is mine, just got the pog2 today and love it!

Chain:
Ernie ball vp>pitch black tuner
Ernie ball vp>ross moded dyna comp>sonic stomp>ts9>yellow drive>corona>pog2>dd5>nova delay>shimverb reverb.

Run it trough a black heart little giant. Hope to get a vox ac15 soon. I play a fender blacktop hh tele which is super versatile.


165014

This is mine, just got the pog2 today and love it!

Chain:
Ernie ball vp>pitch black tuner
Ernie ball vp>ross moded dyna comp>sonic stomp>ts9>yellow drive>corona>pog2>dd5>nova delay>shimverb reverb.

Run it trough a black heart little giant. Hope to get a vox ac15 soon. I play a fender blacktop hh tele which is super versatile.



Nice setup! I have a Nova that I just can't get the hang of, so I admire those who use it and use it well.

Nice setup! I have a Nova that I just can't get the hang of, so I admire those who use it and use it well.

Thanks! As far as the nova, I traded my dl4 in on it about 6 months ago an it definitely took me a while to get the hang of how it works but in the end I would say it was definitely a great trade off. It's a lot less of a tone sucker than the dl4 was as well which is a plus. Haha

thanks ... sounds great, too. not a lot of tap-dancing this morning. just stepped on the GC and played music ;)

nice.

Here is my board (and Tele) from this Sunday:

166220

Here's a shot of my newly, WAY scaled down board. Just the essentials. (My Dr. Z 2x12 open-back made a cameo in this one! Haha!)

www.facebook.com/ZacherySmithMusic

Yet another incarnation... Signal split to stereo at Univibe, L (chorus) driving KOT into house HRD and R (vibrato) driving Amp11 into Fatdrive tube pre into power amp return of my 4xEL84 Velocette Twin.

KOT and amp11 placed side-by-side so I can hit two footswitches at once (ie get both L&R dirty simultaneously).

Not cabled up, but I'll give this a crack next time I'm on.


167787

http://farm9.staticflickr.com/8265/8653289109_448982ec06_o.jpg

Cool pedal strip! How does it work for you?

Choose a random pic of a Fender Mustang Floor. That's what mine looks like.

Cool pedal strip! How does it work for you?

It's magic! The biggest problem is programming the memory slots in a way that you can remember what each patch is.

It's awesome for those of us who hate doing the pedal dance.

And at $300 it's priced well.

Here's what I've been using for the last while. Just bought a digitech fs300 for the eventide.
Haven't added it yet. Anyone else use one of these for the timefactor?