Twang Factor 10
December 14th, 2011, 06:49 PM
I have a G&L ASAT classic that I would like to install a Parsons/Green B bender. I know there are subtle differences between ASATs and Teles. But is there enough difference to matter for a Parsons/Green bender? Also does anyone know where to get a bender the cheapest?
December 14th, 2011, 09:39 PM
Contact Hipshot and have them send you a template. If the template lines up, then you should be able to install the P/G. They may also be able to tell you from experience if it will install in your body. It is major surgery............
December 17th, 2011, 01:12 AM
An ASAT or ASAT Classic will work with a Parsons or Glaser bender; I have both.
Email for pictures.
December 17th, 2011, 11:29 AM
Also, an Evans Pull String....I have one in an ASAT Special and one in an ASAT Classic.
December 17th, 2011, 12:31 PM
Guys, he's talking about a Parson's Green. While I agree that it should work, the only way to be sure is to get a template from Hipshot. Minor differences in body dimensions could cause major havoc, especially at the top edge and forward bout.......
December 18th, 2011, 03:25 AM
I would call Hipshot.