Reilander 'Muckbucker' Hand Wound Humbucker [Archive]

Mreilander

December 12th, 2011, 05:54 PM

Reilander Hand Wound RH-1 'Muckbucker' Humbucker

The Reilander RH-1 Pickups are wound by hand, with an Alnico 2 bar magnet and double coated poly 42awg. With slightly less windings than early PAF's, this pickup works especially well in an HSS configuration. It has a clarity and articulation comparable to a single coil, yet a slight midrange grunt that only a humbucker can provide. This pickup is very dynamic. Subtle changes in picking will be heard, and not lost in the mix. It will push the tubes of your amp when you want it to, and ONLY when you want it to. Works great with an overdrive.

http://www.reilandercustomguitar.com/images/humbucker.jpg

Features
-Wax potted
-Alnico 2 magnet
-Choice of vintage braided, or 4 conductor lead
-Lifetime Warranty on Manufacturing
-Hand Made in Canada

Approximate Values
Neck - 6.50KΩ
Bridge - 6.80KΩ

Price $55.00 cad each or $99.00 for a calibrated set
** Currently only available in 'Zebra'. All black bobbins and nickel/silver covers coming soon.

You can check them out HERE (http://www.reilandercustomguitar.com/rh-1.html)


	Telecaster Guitar Forum > Vendor Forums > Vendor Forum > Reilander 'Muckbucker' Hand Wound Humbucker PDA Reilander 'Muckbucker' Hand Wound Humbucker Mreilander December 12th, 2011, 05:54 PM Reilander Hand Wound RH-1 'Muckbucker' Humbucker The Reilander RH-1 Pickups are wound by hand, with an Alnico 2 bar magnet and double coated poly 42awg. With slightly less windings than early PAF's, this pickup works especially well in an HSS configuration. It has a clarity and articulation comparable to a single coil, yet a slight midrange grunt that only a humbucker can provide. This pickup is very dynamic. Subtle changes in picking will be heard, and not lost in the mix. It will push the tubes of your amp when you want it to, and ONLY when you want it to. Works great with an overdrive. http://www.reilandercustomguitar.com/images/humbucker.jpg Features -Wax potted -Alnico 2 magnet -Choice of vintage braided, or 4 conductor lead -Lifetime Warranty on Manufacturing -Hand Made in Canada Approximate Values Neck - 6.50KΩ Bridge - 6.80KΩ Price $55.00 cad each or $99.00 for a calibrated set ** Currently only available in 'Zebra'. All black bobbins and nickel/silver covers coming soon. You can check them out HERE (http://www.reilandercustomguitar.com/rh-1.html) Guitardad December 22nd, 2011, 03:52 PM Will they be available with covers? Mreilander December 22nd, 2011, 05:31 PM Yes, covers are on their way. They should be here by the 28th. Mreilander February 15th, 2012, 05:22 PM Sound Sample in the bridge position. http://www.youtube.com/watch?v=Dr4oH6h3sao We now have Nickel/ Silver Plated and Nickel/Silver Bare covers.