Strat wiring mod, 2 volumes, 1 tone

Hey folks,

I worked up a wiring mod for a strat . this way one volume works the neck and middle pickups. the other works the bridge. the tone is a master tone. This does have the Les Paul thing where if either volume is turned all the way down, then there is no output from either. The schematic just shows the hot wires. grounds go to the bottom of the pots and all pots are grounded together.

http://i456.photobucket.com/albums/qq284/no-name911/wiringmod.jpg

Enjoy,

Matt

I will likely revise this a bit. I think by running the lines from the switch to the middle tab of the volume pots, and have the output from the other tab, i can keep the output independent. will let you know.

This is a revised schematic for independent volume controls. I still only show the hot wires. Ground wires are grounded to the bottom of the pots and all pots are grounded together.

http://i456.photobucket.com/albums/qq284/no-name911/WiringMod2.jpg

Handy!

Going off your idea....what could you do in that middle position if only 2 pickups are configured? I have a project strat that has a filtertron and a single coil configured.