For those with belt loop-activated benders...

What do you all use to attach your belt loop to the bender? I have a G-bender and I use a clip like this

http://i28.photobucket.com/albums/c232/drjordan/keyring3big.jpg

to hook the piece that attaches to the bender arm to my belt loop. Just looking for new ideas. I would like something that's longer that I can hook to the belt loop on my side instead of the one at my belt buckle.

Mine has a nylon strap that runs from the pull to a belt loop. Its missing atm. Or I'd post a pic! I really don't use the G bender. The motion to activate it never became natural for my like the B did. Soon I will have my next project guitar back from the shop and it will have just a G bender.

I'll bet you could make one from a loop of velcro. I would just use what you have. Take the ring off the hook and run a velcro loop between them. Quick n easy. They sell a velcro loop at home depot used to secure extension cords. I figure that would be large enough.

I use something like that too. BUT WHAT I MOSTLY USE is a great big strap I attach that to....because I cannot do long hours of playing and practicing stading up. So I put that strap somewhat below my ribcage and can work the G Bender lever very comfortably sitting down.

I've converted an old key ring w/ D ring carabiner. Just hook the carabiner onto the belt loop and the key ring to the guitar. Works just fine. I started out using a pocket watch chain, but it was too long.