December 29th, 2010, 12:13 AM
I'm looking for a wiring diagram (I checked the Duncan website for it but to no avail). I want to wire my tele with a splittable humbucker in the neck position via a push/pull pot. To clear up any confusion, it's a basic 1 volume, 1 tone, and a standard 3-way blade and I plan on using 500k pots, one of which will be a push/pull.
December 29th, 2010, 01:17 AM
This diagram (http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=tele_1hum_1sing_pushpull) is close enough.
December 29th, 2010, 01:49 PM
I saw that diagram... I'm looking for it with a neck humbucker. While that may be close enough for you, it is not for me at my level of comprehension. I'll pose this question; How does one convert that diagram to what I want?
December 29th, 2010, 02:57 PM
You would just switch the white wire on that diagram (from the neck SC) with the Black wire from the humbucker on the 3 way switch. Everything else would be the same.
December 29th, 2010, 06:12 PM
Thanks cc9cii and overlook1977! I knew it would be something simple like that.