Need help wiring a tele....

Hello everyone. I just got a japanese tele back I'd sold to a friend. It's got a LP style 3way. I wanted series/paralel & phase change. I've got an Ibanez LP P-90/HB. I phase changed the P-90 with a PP on the tone pot, Series/Paralell with a pp on the Volume pot that takes the 3way out of the circuit. I don't have a copy of the wiring schematic so I just copied my Ibanez only difference is I kept the original Vol pot & added one PP & a DPDT switch. The bridge pickup which always worked well in the past, didn't play it B4 but it read about 4.5 Ohms. It barely plays now & measures 3.4 ohms. The original neck pup reads about 3.4 ohms ( I removed the ground from the pup winding). The neck rails seems great but what happened to my bridge single coil?? Thanks in advance for any help. Bedtime now 4 me...

Not really following what you did...but here are a bunch of schematics, you can try to find which one most closely resembles what you are trying to accomplish...

http://www.**********************/category/wiring_resources_guitar_wiring_diagrams.2_pickup_g uitar_wiring_diagrams/

Teleintozinky, Thanks, I'm close. Got the bridge pup workin' again but thr 3way switch has no effect at the moment. Both pups on. I wil learn to pup wiring drawing online in the new year.....Cheers.....