savvy
November 6th, 2009, 10:01 AM
Hi all,I have built and fitted an Alembic stratoblaster booster to my tele.I built it on vero and works superbly,BUT!!! the pot only works over the very last part of the sweep.I have only got a 50K log pot and it asks for a 50KRA pot but they are hard to come by so seemed to me that what I have should still work only in reverse?I have searched the sites and some say try a 100K lin with a 100k resistor across, just the same! then 100k with 470K & 5K resistors from 2 tag to 1&3, 100K from 1 to 2 and 5K from 2 to 3, but they all give the same results.
This is where I got the vero layout:
http://www.aronnelson.com/gallery/main.php/v/DRAGONFLY-LAYOUTS_0/album14/album143/ALEMBIC_STRATOBLASTER_VERO_001.gif.html
This is the schematic site:
http://www.generalguitargadgets.com/pdf/ggg_sbb_sc_i.pdf
I modified it by connecting between output from vol pot and the jack and ommiting led jacks etc and used a dpdt switch and fitted in body of guitar.
Pics of the board and fitting are in TDPRI:Andy Summers Tele,page 4 post 141
All help gratefully accepted as I am scrathing my head,as usual:roll:
Ps Thanks for all the help with rewinding as I now have a bridge pup that matches my neck bucker in output and still got twang 10K reading.:grin:
Savvy
This is where I got the vero layout:
http://www.aronnelson.com/gallery/main.php/v/DRAGONFLY-LAYOUTS_0/album14/album143/ALEMBIC_STRATOBLASTER_VERO_001.gif.html
This is the schematic site:
http://www.generalguitargadgets.com/pdf/ggg_sbb_sc_i.pdf
I modified it by connecting between output from vol pot and the jack and ommiting led jacks etc and used a dpdt switch and fitted in body of guitar.
Pics of the board and fitting are in TDPRI:Andy Summers Tele,page 4 post 141
All help gratefully accepted as I am scrathing my head,as usual:roll:
Ps Thanks for all the help with rewinding as I now have a bridge pup that matches my neck bucker in output and still got twang 10K reading.:grin:
Savvy
![$vboptions[bbtitle]](../../gifs/tdpr-headTRANS.gif)