Will it work?

Anyone out there know if I can use this neck plate

http://app.infopia.com/img/image/fp/VPID/7200602/img-2/img.jpg

on this neck?

http://www.edenguitarparts.com/pictures/Neck/Paddle%20neck/PBN-211-NA-1.jpg
http://www.edenguitarparts.com/pictures/Neck/Paddle%20neck/PBN-211-NA-5.jpg

Thanks in advance!

Why not? Are you going to use the micro tilt feature? If so, its the right one for sure.

J

I haven't seen a Micro-Tilt taken apart first hand but isn't the neck heel modified with a plate for the tilt feature too?

I thought it would since the truss rod adjust would be done at the nut. The micro tilt is like a built in adjustable shim, right? Will it work with regular neck screws if I don't go the micro tilt route?

I can't see any reason that it wouldn't, should be ok.

yeah, i put the exact same (i think) neck plate on a random parts neck i got off ebay, it does work without the whole micro-tilt thing but i found the micro-tilt really handy so i went with it in the end.