$vboptions[bbtitle]

Fender 5 way super switch

fergy
October 31st, 2009, 05:18 PM
I have a Bluesboy USA that had a SD sethlover 2 conductor picup in the neck position, i replaced with SD 4 conductor picup and would very much like to use a Fender 24 lug super switch. I've been all over the net and cannot find what i feel i need. Are there any guru's available to end this dilemma cause im ready to can the whole thing. Thanks in advance.

Geo
October 31st, 2009, 07:06 PM
Hi,

Try one or all these........

http://www.guitarpartsresource.com/

http://www.bestguitarparts.com/

http://www.wdmusic.com/

http://www.guitarelectronics.com/

newtwanger
October 31st, 2009, 07:12 PM
Are you looking for the part (which is available on eBay) or the know-how to wire it (diagram)? You haven't said what you want it to do in each position if that's the case...

fergy
October 31st, 2009, 08:28 PM
Are you looking for the part (which is available on eBay) or the know-how to wire it (diagram)? You haven't said what you want it to do in each position if that's the case...

Hi, I wanted to be able to series/parrallel. I have the switch, also im open to suggestions as to what options might be more useable. Thanks

newtwanger
October 31st, 2009, 08:45 PM
This page is your friend

http://www.seymourduncan.com/support/wiring-diagrams/

including

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=ssp

and

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=3ws_trans

but you gotta understand this first

http://www.stewmac.com/freeinfo/i-3200/3200_01terminalmap.gif

have fun!

cc9cii
October 31st, 2009, 10:46 PM
What did you want to do with that switch? Note that a normal Fender teles have difficulty fitting that switch, don't know if Bluesboy has a larger cavity?

With a humbucker in the neck and a single coil in the bridge, you're not likely to need a super switch (depends on what you want, however).

Deaf Eddie
November 2nd, 2009, 06:01 PM
Call out the five tones you want, and I'll draw it up...

bobthecanadian
November 2nd, 2009, 06:51 PM
Deaf Eddie,

You RAWK! Not sure if it's been said here before, but your willingness and availability to help out sure is appreciated.

Sorry, y'all, for the mini-hijack. Now, back to your regularly scheduled programming.

berzirk
November 2nd, 2009, 07:01 PM
Hope that I am not asking an old question that has been answered...
Building a Tele w/ Full HB neck, Start Middle, and Tele Bridge. Finally (?) found the woring diagram to get all tones including the Brideg/Neck in the American Deluxe Tele 0105500/5502. Do I have to make any additional mods to wire the Humbucker in lieu of the single coil in the neck?

Thanks,
Berzirk

Deaf Eddie
November 3rd, 2009, 04:22 PM
Do I have to make any additional mods to wire the Humbucker in lieu of the single coil in the neck?


Nope.

berzirk
November 4th, 2009, 01:54 PM
Thanks Deaf Eddie. Not the first time you've answered a question correctly for me. Now I just have to wait for warmer weather to do the finishing work

Berzirk